Votos - 6, Puntuación media: 4
(
)
)
|
Resumen del manual
This product, like any electrical device on your motorcycle, requires that your motorcycle battery be in proper working order and fully charged. To ensure proper operation, periodically have your motorcycle battery “load-checked” at any local garage/mechanic and ask them to verify that the charging system is working properly. Also make sure that the battery cables and connections are tight and free from corrosion. Us er’s Man ual/299 Wel come to the world of high- technology ve hi cle se cu rity and con ven ience Wel come to the world of high- technology ve hi cle se cu rity and con ven ience C C ongratulations on the purchase of your GP500 motorcycle security/convenience system. Your re mote con trols The weather resistant pair of remote controls that are provided with GP500 are ultra-sophisticated miniature radio transmitters powered by a single miniature battery (a 3-volt lithium). GP500 Re motely con trol ling your GP500 Each of your two remote controls can command several different functions. TO ARM: Press button I on the remote control. You will hear two chirps and the indicator lights will flash twice. The LED will flash repeatedly. TO DIS ARM: Press button I on the remote control. One chirp and one indicator light flash confirms disarming and the LED turns off. TO ARM OR By pressing button II on the remote control, you DIS ARM SI LENTLY: can arm or disarm your GP500 with all the indications previously noted except the chirps. TO AC TI VATE For three seconds, continually press button I on the THE BIKE BEA CON remote control. The indicator lights will flash LO CA TOR: repeatedly and the siren will blare until you press the button again to turn it off. Us er’s Man ual/299 3 TO AC TI VATE IN STANT AUTOARMING BYPASS: Press button III on the remote control and hold for three seconds. Two indicator light flashes confirm that GP500 will NOT AutoArm. If you press and hold button III for three seconds once more, the system will respond with one indicator light flash which means that AutoArming has been reactivated. The next time the motorcyle is parked, the GP500 system resumes normal AutoArming operations. OTHER FEA TURES Other features can be accessed as noted in the following chart: GP500 QUICK REF ER ENCE: RE MOTE CON TROL FUNC TIONS Function Press button(s) Arm or dis arm I Si lently arm or dis arm II In stant AutoArming By pass (press and hold but ton for three sec onds while sys tem is dis armed) III Dual- Level Piezo Sen sor Warn ing Level By pass (press but ton within 10 sec onds af ter arm ing the sys tem) III Dual- Level Piezo Sen sor To tal By pass (press and hold but ton for three sec onds within 10 sec onds af ter arm ing the sys tem) III Digi tal Tilt/Mo tion Sen sor Warn ing Zone By pass (press but tons within 10 sec onds af ter sys tem is armed) II + III Digi tal Tilt/Mo tion Sen sor To tal By pass (press and hold but tons for three sec onds within 10 sec onds af ter sys tem is armed) II + III Dual- Level Piezo Sen sor Ad just ment (press and hold but tons for three sec onds while sys tem is dis armed. See page 21 for com plete in struc tions) II + III Un as signed* I + II Un as signed* I + III * Can be as signed to Clifford ACG-2 sys tems on your other ve hi cles. Us er’s Man ual/299 ACG-2™ (Anti- CodeGrabbing 2™) Clifford’s ACG-2 protects your motorcycle from thieves’ remote control ACG-2™ (Anti- CodeGrabbing 2™) Clifford’s ACG-2 protects your motorcycle from thieves’ remote control “cloning” devices that are used to record the disarming code transmitted from your remote. you disarm rather than the single chirp that you normally hear. Auto matic re mote con trol low- battery warn ing If your remote control battery is very low, you will hear five rapid chirps when Re mote con trol bat tery re place ment Any Authorized Clifford Dealer will be happy to replace a remote control battery for you without cost provided you purchase the replacement battery at their shop (it’s also a good idea to keep a spare battery on-hand just in case). 1. Insert a small, thin screwdriver blade in the slot near the keyring opening (you may leave the keyring in place) and turn it to separate the two halves. 2. Remove the old battery noting the + and – indications and replace it. 3. Put the enclosure back together by first aligning the top of the remote, then snapping the case back together at the bottom. GP500 Two- Point In ter nal Im mo bi li sa tion Two- Point In ter nal Im mo bi li sa tion Please be aware that the AutoArming feature has no effect on Immobilisation. The system automatically immobilizes your vehicle’s starter and ignition 30 seconds after engine shutdown or when you arm with the remote control. When you remotely disarm your GP500 system, the Immobilisation circuits will automatically disengage. You then have 30 seconds in which to start the engine (or turn the ignition switch to its “ON” position). If more than 30 seconds pass, the immobilizer will automatically reactivate. This will be visually i...