Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Aside from the slight differences noted in this manual, the warnings, operation instructions, and maintenance procedures will remain the same. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at To prevent serious injury or blindness, Read and understand all warnings and Instructions before use. Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Manual revised 08/06 Auto-Darkening For technical questions, please call 1-800-444-3353. Page Welding Helmet Specifications Model 91212 91214 94336 94337 Shell Designs Blue Flames Eagle Skull Power Source Solar Cells (rechargeable battery included, no additional battery required) Solar Cells (rechargeable battery included, battery lifetime 4,000 hours) Viewing Area 3.86” x 1.73” 3.74” x 2.44” Operating Temperature 23 to 158° F 14 to 158° F Clear State 4 DIN 3.5 DIN Shade Range 9 to 13 DIN Ultraviolet / Infrared Protection up to shade 14 all the time Welding Protection Types For All Arc Welding Processes; Not for Laser Welding or Oxyacetylene Welding/Cutting Shell Material High Impact-Resistant Plastic Polyamide Nylon Lens Switching Speed (Clear to Dark): 1/25,000 second ANSI-Approved Lens Weight 1.5 lb. Power ON / OFF Fully Automatic Storing Temperature -4 to 158° F Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Do not use the Welding Helmet if the lens is cracked, if the lens or sensors are dirty, or if the lens or front retaining frame is loose. 2. Keep work area clean. Cluttered areas invite injuries. 3. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use electrically-powered tools in the presence of flammable gases or liquids. 4. Keep children away. Children must never be allowed in the work area. Do not let them REV 11/06 handle machines, tools, or extension cords. 5. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective gear is essential to protect against welding rays, some examples are: a leather welding apron, welding sleeves, jeans without cuffs, work boots. Wear restrictive hair covering to contain long hair. 8. Use eye and ear protection. When welding, wear ANSI-approved impact safety goggles under the Auto-Darkening Welding Helmet. Wear a NIOSH- approved respirator and hearing protection when welding. 9. Do...
Otros modelos de este manual:bicicletas - 91212 (858.21 kb)
bicicletas - 94337 (858.21 kb)
bicicletas - 91214 (858.21 kb)