Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Lund Industries, modelo Headlight Flasher AT-500

Fabricar: Lund Industries
Tamaño del archivo: 662.83 kb
Nombre del archivo: ddb41677-6bfc-1474-2998-da4831feca6c.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


6/05 AT-500 Alternating Flasher For Vehicles With Ground Side Switching Headlights It is important to read, understand and follow all instructions shipped with this product. Failure to follow all safety precautions and instructions may result in serious injury or death to you or to others. NOTE With most foreign vehicles, the low beam headlights must be turned ON before the headlight flasher will operate. This needs to be done because of the design of the headlight wiring. INSTALLATION NOTE Please refer to the Compatible/NonCompatible Vehicle Lists before attempting installation. STEP #1 Mount the Flasher near the passenger side headlight. STEP #2 With the headlights in the OFF position, measure the voltage on all 3 wires going into the driver side headlight. If all the wires have voltage on them, it is not required to turn the headlights ON for the Flasher to operate. STEP#3 Turn the headlights ON in the high beam position. Measure the voltage on all 3 wires going into the passenger side headlight. The wire with no voltage on it is the high beam wire. This wire is where the Flasher wires need to be installed. NOTE If only one of the three wires has voltage on it when the high beams are ON, this Flasher WILL NOT work on your vehicle. Contact Lund Industries, Inc. for assistance. STEP #4 Connect the black wire to the negative post of the battery. STEP #5 Connect the red wire to a switch that has a 12 volt fused source connected to it. DRIVER SIDE HIGH SEAM PASSENGER SIDE HIGH BEAM CUT HIGH BEAM WIRE TO ♦ 12V SWITCHED AT-500 z 9 UJ < w ^ x 03 o oc o TO NEGATIVE TERMINAL OF BATTERY Wiring Diagram STEP #6 Cut the high beam wires less than 12 inches from the passenger side headlight. Attach the yellow wire to the high beam wire that goes directly to the headlight. STEP #7 Attach the blue wire to the wire that was originally connected to the passenger side high beam. STEP #8 Test the Flasher and headlight operation. WARRANTY Lund Industries, Inc. warranties the AT-500 Electronic Flasher System for one (1) full year from the date of purchase to the original purchaser against any manufactured defects or workmanship. This warranty applies only to units installed according to manufacturer's installation instructions and operated within the units specifications. Warranty is void if the unit was installed incorrectly or maliciously damaged. All warranty claims must be accompanied by a dated proof of purchase. Lund Industries. Inc. retains the right to be the sole mediator of what constitutes defects in performance or manufacturing. Covered under U.S. Patents #4114071 and #4309639. Specialists in Emergency Vehicle Products since 1978 • Design, Manufacturing, Distribution and Installation COMPATIBLE VEHICLE LIST ACURA Acura Integra 1989 and later Acura Legend DODGE 1986 and later Dodge D50 Truck 1999 and later Dodge Durango EAGLE 1990 and later Eagle Talon GEO 1991 Geo Metro 1992 and later Geo Prizm 1992 and later Geo Storm 1992 and later Geo Tracker HONDA 1991 and later Honda Prelude and Accord HYUNDAI 1988 and later Hyundai SL/GL 1990 and later Hyundai ISUZU 1991 and later Isuzu Truck 1994 and later Isuzu Trooper LEXUS 1992 and later Lexus LS400 MITSUBISHI 1990 and later Mitsubishi Montero 1993 and later Mitsubishi Eclipse SATURN 1991/1992 Saturn Sedan SUZUKI 1991 and later Suzuki Swift TOYOTA Toyota T100 Full Size 1986 and later Toyota Truck 1986 and later Toyota Tercel 1986 and later Toyota 4 x 4 Truck 1987 and later Toyota Corolla This is not a complete list, but rather a comprehensive list of vehicles Lund industries, Inc. knows to have Ground Side Switching Headlights. If you are unsure about your vehicle, obtain a copy of your headlight schematic from your dealer and FAX a copy to Lund Industries, Inc. attn: Technical Department and someone will assist you. NON-COMPATIBLE VEHICLE LIST The AT-500 WILL NOT work on the following vehicles. These vehicles have Hot Side Switching Headlights and the AT-300 Flasher should be used instead. HONDA 1982 and later Honda Civic and Civic LX 1985 and later Honda Accord NISSAN 1984 and later Nissan Truck 1986 and later Nissan 4 x 4 Truck 1990 and later Nissan Pathfinder 1993 and later Nissan Altima 1994 and later Nissan Sentra MAZDA All Models VOLKSWAGEN All Models AT-500 PM6S 09/01...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría