Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
This is a unique high power 12 volt system. Before operating, thoroughly familiarize yourself with this manual so that you understand the light's safe and correct operation. Please keep this manual, along with the warranty card, for future reference. NAMES Make sure that the following parts are included in the package. U.S. Pat. No. 5735441 and Design Patented Copyright© Jul.1999 CAT EYE Co., Ltd. Printed in Japan MH31W-011120 0688540 3 Metal Halide Lighting System STADIUM LIGHT 3 HL-MH310 INSTRUCTION MANUAL Lamp Body Cord Ballast Rubber Pad Bracket(H-27) AC Adapter Battery Belts Bottle Battery Battery: Ni-MH 12V Mounting Example Supporter Stopper E FOR SAFE OPERATIONS (IMPORTANT) Warning!!! Important Note • Pace maker users should never use this device. • The lamp body becomes extremely hot when turned on. Never touch the lamp body or lens until thoroughly cooled. Injury may result. • Never gaze at the light when it's turned on. It may harm your eyesight. • Do not use this light on public roads. The light output is equal to an automobile’s halogen bulbs. Adjust the light accordingly so as not to blind oncoming traffic. • Stop using the light at once if the lamp unit, cord or bottle battery has broken. Hazards may result due to a high voltage system. • Never short-circuit the terminal of the bottle battery and the plug of the AC adapter. It may cause the battery to over heat, resulting in fire or damage of the components. • Safely and properly dispose of the old Ni-MH batteries according to your local regulations. To remove the battery, turn the bottom part of the bottle battery counterclockwise. • Never place it within children’s reach. • Although the lamp body and the battery are water-resistant (under normal weather conditions of rain, etc.), never intentionally submerge them under water. • The battery used with the Stadium Light is 12 volts. Never attempt to alter this lighting system. Never use the battery with any other lighting system. • Never disassemble the lamp body, ballast and battery. • The battery has unique characteristics. The light output will remain high until the batteries run out, and will drop suddenly. Always pay attention to the remains of the charge and take precautions by preparing a spare light. • Never replace the bulb unit by yourself. It is not user-replaceable. It can never regain its best performance. • Never touch the metal halide bulb with bare-fingers; natural skin oils can cause the bulb to over heat and break. • Never touch or wipe the inside of the reflective mirror. This may degrade the quality of the light output. • The ballast is loaded with sensitive electronic components. Severe impact may result in malfunction. • The AC adapter is only for indoor use. After charging the battery, be sure to unplug it from the power outlet. • Never use the bottle battery for other equipment. • A long period of non-use will lower the voltage of the battery due to natural self discharge. Always charge the battery before using. • Overdischarge (leaving the light on after the power is completely gone) shortens the performance life of the battery. • If the lamp body or parts become dirty with mud, etc., gently wipe it away with a dish towel which is moistened with mild soap. Never apply paint thinner, benzene or alcohol; damage will result. How to Adjust the Angle of Beam Switch on the light at night in flat place, and adjust the angle vertically. It can also be adjusted 10° horizontally. To adjust it, loosen the screw of the bracket a little. Warning!!! In addition to its high brightness, the beam is widely diffused. In case you should use this light on public roads, he sure to adjust the angle downward so as not to blind oncoming traffic. 2 Stadium Light E bracket (H-27) HOW TO MOUNT Mount the lamp unit to the bracket, the ballast to your frame and bottle battery to your bottle cage. Then connect the jack of the bottle battery with the plug of the ballast. Installing Bracket 1. Attach the bracket to the handlebar using the appropriate rubber pads. Hand-tighten the bolt. 2. Before tightening the bolts securely, adjust the angle of the beam and the position of the lamp body. (See “How to Adjust the Angle of Beam” in the “Important Note”.) 3. Tighten the bolt securely. (For a more secure fit, use a screwdriver.) Mounting Lamp Unit Warning !!! Never touch the lamp body until it is thoroughly cooled. You may get burnt. bracket lever • To mount the lamp body, slide it backward onto the bracket until it rubber pad bolt lamp body slide clicks into position. • To remove the lamp body, slide it forward while pushing the lever. Mounting Ballast Attach the ballast under the top tube and round the belt. If it is not secure, use the supporter and stopper as shown in the figure. If your frame is Y-frame, attach the ballast at the side of the frame. Note !: Be sure that the ballast is tightly attached to the frame. Installing Bottle Battery Insert the bottle battery into your bottle cage. Secure it wit...