Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Cateye, modelo Tomo CC ST-200

Fabricar: Cateye
Tamaño del archivo: 236.8 kb
Nombre del archivo: 521801d7-563a-be54-3514-647801d85d34.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Pat. Nos. 4636769/4642606/5236759/5226340/5264791 and Design Patented Copyright© 1996 CATEYE Co., Ltd. CCMST2-970214 Printed in Japan 0687261 3 CATEYE TOMO CYCLOCOMPUTER Model CC-ST200 TIRE SIZE TIRE SIZE TIRE SIZE 20 x 1.75 150 26 x 1.40 200 650 x 38B 211 24 x 1 175 26 x 1.50 199 700 x 18C 207 24 x 3/4 Tubular 178 26 x 1.75 202 700 x 19C 209 24 x 1-1/8 Tubular 179 26 x 1.95 205 700 x 20C 209 24 x 1-1/4 191 26 x 2.00 206 700 x 23C 210 24 x 1.75 189 26 x 2.1 207 700 x 25C 211 24 x 2.00 192 26 x 2.125 207 700 x 28C 214 24 x 2.125 196 26 x 2.35 208 700 x 30C 217 26 x 1(559mm) 191 27 x 1 215 700 x 32C 216 26 x 1(650c) 195 27 x 1-1/8 216 700C Tubular 213 26 x 1.25 195 27 x 1-1/4 216 700 x 35C 217 26 x 1-1/8 Tubular 197 27 x 1-3/8 217 700 x 38C 218 26 x 1-3/8 207 650 x 35A 209 700 x 44C 222 26 x 1-1/2 210 650 x 38A 212 TROUBLE SHOOTING • The following situations do not indicate malfunction of the cyclocomputer. Check the following before taking to repair. * When current speed does not appear, short-circuit the contact on the back with metal. The unit will function normally if the speed display appears. Display response is slow. ----- Is it at a low temperature under 32°F(0°C)? ----- It returns to normal state when temperature rises. No display. ----- Has the Lithium Battery in the main unit worn out? ----- Replace the Lithium Battery with a new one. Incorrect data appear. ----- Execute "All Clear" operation. Current speed does not appear. ----- Is there anything on the contact of the main unit or of the bracket? ----- Wipe the contact clean. ----- Is the distance between sensor and magnet too far? ----- Are the marking line of the sensor and the center of magnet matched each other? ----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly. ----- Is the wire broken? ----- Replace the Bracket & Sensor part with a new one. Transmission signal loss in damp or wet conditions. ----- Water or condensation may collect between the bracket sensor and the computer causing an interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use industrial water repellent; it may damage the bracket. When the S/S button is pressed, the unit doesn't activate or stop. ----- Is the unit in the Auto function? ----- The S/S button doesn't function in the Auto function. MAINTENANCE/PRECAUTIONS • Do not leave the main unit exposed to direct sunlight when the unit is not in use. • Do not disassemble the main unit, sensor and magnet. • Don't pay too much attention to your computer's functions while riding! Keep your eyes on the road and duly consider to traffic safety. • Check relative position of sensor and magnet periodically. • For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply paint thinner, benzine, or alcohol, to avoid damages on the surface. • If there is mud, sand or the like clogs between the button and the body, the movement of the button may be disturbed. Softly wash away such objects with water. SPECIFICATIONS Applicable Cycle Sizes 130cm - 229cm Applicable Fork Diameter 11o - 36o (S:11 - 26o L:21 - 36o) The length of the wire 70cm Power Supply Lithium Battery (CR1620/CR1616) x 1 Battery Life Approx. 3 years(The life of the first factory-loaded battery may be shorter than this period.) Dimension/Weight 1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g) Controller 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display Liquid Crystal Display Sensor No Contakt Magnetic Sensor Operating Temperature Range 0°C - 40°C(32°F - 104°F) * The specifications and design are subject to change without notice. LIMITED WARRANTY 1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded) If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and transportation charges to our service shall be borne by person desiring service. (Address for service) 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CATEYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone: 303-443-4595 Toll Free: 800-5CATEYE Fax: 303-473-0006 e-mail: CatEyeUSA@aol.com CATEYE MEASURING AND DISPLAY FUNCTIONS E OPERATING INSTRUCTIONS SPD Current Speed 0.0(3.0) - 65 mile/h(27inch) ±1 mile/h under31 miles/h This is always displayed on the main display and updated once a second. ODO Total Distance (Odometer) 0.0 - 9999.9 mile ±0.1 mile This is continuously measured until battery wears down or all clear operation is done. At...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría