Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Please keep this manual for future reference. NAMES Please make sure that all the following parts are in the package. * The package for Solo includes each 1 set of lamp unit(Spot Bulb), bracket, rubber pad; and the cord of the remote switch is single (not furcated). FOR SAFE OPERATION (IMPORTANT) • Never short-circuit the terminal of the battery and the plug of the battery charger. It may cause the battery to overheat, resulting in fire or damage of the components. • Securely connect the plug so that the light will not turn off while riding, or the cord will not hinder riding. • If the cord of the battery charger, the battery cord or battery unit is damaged, it must only be replaced by the shop where this lamp kit was purchased, because special purpose tools are required. • The lamp unit becomes hot when turned on. Never touch the lamp unit or lens until thoroughly cooled. Injury may result. • Use only the included battery charger for charging. • Safely and properly dispose of the old battery accorfing to your local regulations when it comes to the end of its useful life. • This lamp kit is not intended for use by young children or infirm persons without supervision; young children should be supervised to ensure that they do not play with this appliance. • Take precautions against a sudden battery run-out. Carry a spare light or spare batteries BEFORE FIRST USE: Before first use, charge the battery fully following the instructions on [HOW TO CHARGE]. Before every use, charge the battery fully following the instructions on [HOW TO CHARGE]. When the battery kit is not in use for a long period, the lampis operation time will be shortened due to the self-discharge of the sealed-lead-acid battery. WARNING!! Important Note HOW TO ATTACH THE BRACKET [Use two brackets for Twin.] 1. Attach the bracket (H-30) to the handlebar using the appropriate rubber pads provided. 2. Turn the quick lever (keeping it upright). Fix the bracket securely by pulling up the lever. To loosen the bracket, pull down the quick lever. Before use, adjust the angle of the beam and the position of the lamp unit, according to the instruction of "How to Adjust Angle of Beam" in "HOW TO USE". HOW TO ATTACH THE REMOTE SWITCH Attach the remote switch onto the handlebar where it will not hinder the braking and shifting operation. Attach the remote switch using the appropriate rubber pads provided. Note: To remove the remote switch, slide it to the left while pushing the lever. HOW TO MOUNT Before connecting the cords, mount the battery unit and lamp unit onto the right places. Installing the Battery Unit Insert the battery unit into your bottle cage. Secure it with the battery belts. Note: The battery unit might jump out of the bottle cage during ride. Be sure that it is tightly and firmly fixed. Note: The battery unit may not fit all kinds of bottle cages. The battery unit also can be attached under the top tube or along the seat post using the battery belt. (See “MOUNTING VARIATION OF THE BATTERY UNIT”) Mounting the Lamp Unit Warning!: Never touch the lamp body until it is thoroughly cooled. You may get burnt. • To mount the lamp body, slide it backward onto the bracket until it clicks into position. • To remove the lamp body, slide it forward while pushing the lever. SPECIFICATIONS Bulb: 6V-10W Halogen Bulb Battery: BA-220 Sealed-Lead-Acid Battery 6V 4.2AH Charger: CAT EYE Battery Charger AD-1250 Operation Time: Solo 10W (HI): approx. 2 hours 5W(LOW): approx. 3 hours Twin 10W+10W approx. 1 hour 10W approx. 2 hours Charging Time: 8 to 10 hours Temperature Range: Charging: 0°C - 30°C Operating: –15°C - 45°C Recharge/Discharge Number of Times: at least 150 times (until rated capacity drops to 50%) * The specifications and design are subject to change without notice. LIMITED WARRANTY 2-Year Warranty: Only Lamp/Remote switch and Battery Charger (Excluding bulb and battery) If trouble or damage occurs during normal use, the product will be repaired or replaced free of charge. Type your name, address, date of purchase and the situation of trouble clearly, and send it to the appropriate service center together with the product. Insurance, handling and transportation charges shall be borne by the customer. After being repaired or replaced, the product will be shipped back to the customer. Address for service: 2-8-25 Kuwazu, Higashi Sumiyoshi-ku Osaka 546-0041 JAPAN Attention: CAT EYE CO., LTD. Customer Service Section Phone: 81-6-6719-7781 Fax: 81-6-6719-2362 Service & Research Address for United States Consumers: CAT EYE Service & Research Center 1705 14th St. #115 Boulder, CO 80302 Phone: 303-443-4595 Toll Free: 800-5CATEYE(800-522-8393) ...
Otros modelos de este manual:bicicletas - HL-RC220 (201.99 kb)