Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Adult assembly is required. Requires three "AA" batteries (included). Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg). sher-price.com 2 IMPORTANT! • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call toll-free 1-800-432-5437, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. • Some parts shown are assembled to both sides of the trike. ©2007 Viacom International Inc. All Rights Reserved. Nickelodeon, Nick Jr., Dora the Explorer and all related titles, logos and characters are trademarks of Viacom International, Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. PRINTED IN MEXICO ©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. J5242a-0920 This product contains small parts in its unassembled state. Adult assembly is required. Parts Seat Frame 2 Pedals 2 Fork Covers Front Wheel Pedal Axle Fork Basket Seat Retainer Cap Straight Axle 2 Rear Wheels Handlebar 2 Hubcaps 2 Covers 4 Pedal Hubs #8 x 3" Screw – 1 #8 x 3/4" Screw – 6 FASTENERS ACTUAL SIZE Cap Nut – 2 Part Not Shown: Label Sheet CAUTION Assembly Rear Wheel (Indented Side Down) Cap Nut Rear Wheel (Indented Side Up) Cap Nut Assembly Tool Assembled Rear Wheel Straight Axle BOTTOM VIEW Hubcap (Peg Side Up) Hubcap (Peg Side Down) Frame Straight Axle 3 Straight Axle Cap Nut Cap Nut Assembly Tool Scrap Block of Wood 1 Scrap Block of Wood Cover Hubcap Assembly Rear Wheel (Indented Side Down) Cap Nut Rear Wheel (Indented Side Up) Cap Nut Assembly Tool Assembled Rear Wheel Straight Axle BOTTOM VIEW Hubcap (Peg Side Up) Hubcap (Peg Side Down) Frame Straight Axle 3 Straight Axle Cap Nut Cap Nut Assembly Tool Scrap Block of Wood 1 Scrap Block of Wood Cover Hubcap • Fit a cap nut into the cap nut assembly tool. Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a hubcap (peg side up) onto the straight axle. • Slide a rear wheel (indented side down) onto the straight axle. • Turn the frame upside down. • Insert the straight axle through the holes in the rear of the frame. Hole Hole Frame Straight Axle BOTTOM VIEW 2 • Turn the frame on its side with the exposed end of the straight axle up. • Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut. • Slide a rear wheel (indented side up) onto the end of the straight axle. • Slide a hubcap (peg side down) onto the straight axle. • Place a cap nut on the end of the straight axle. Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle. • Insert one of the tabs on a cover into a slot in the hubcap. Push to snap the cover into place. Repeat this procedure to attach the other cover to the other hubcap. • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. Pedal Hub Pedal Hub Pedal Axle Tab Tab Slot 4 3 Assembly Assembly Hole Pedal Axle Pedal Hubs Front Wheel 5 Pedal Axle Scrap Block of Wood Pedal 7 • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Turn the front wheel assembly over. • Insert the remaining pedal hubs on top of and below the pedal axle and into the hole in the center of the front wheel. Pedal Hub Pedal Hub • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Fit a pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with the hammer again. • Repeat this procedure to attach the other pedal to the other end of the pedal axle. Fork Arms Pedal Axle Groove Fork Cover 8 • Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • Insert two #8 x 3/4" screws into the fork cover and tighten. • Repeat this procedure to attach the other fork cover to the other fork arm. 4 5 Assembly • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post. Hint: You may need to rotate the handlebar to align the holes. • Insert the #8 x 3" screw thro...