Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood (tools not included). If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. Age: 2 - 5 years. Weight Limit: 55 lbs. This product contains small parts in its unassembled state. Adult assembly is required CAUTIONThis product contains small parts in its unassembled state. Adult assembly is required CAUTION WARNING • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Parts • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. #8 x 3" Screw – 1 #8 x 3/4" Screw – 4 (ALL SHOWN ACTUAL SIZE)Washer – 2 Cap Nut – 2 4 Pedal Hubs 2 Pedals Pedal Axle 2 Fork Covers Front Wheel Fork Frame Handlebar Seat Straight Axle 2 Washers 2 Rear Wheels 2 Hubcaps 2 Cap Nuts 2 Note: Some parts shown are assembled to both sides of the trike. Label Sheet not shown. Assembly Assembly • Place a cap nut on a scrap block of wood. • Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a hubcap (peg side up) onto the straight axle. • Slide a rear wheel (indented side down) onto the straight axle. • Slide a washer onto the straight axle. Cap Nut Straight Axle Rear Wheel Indented Side Down Straight Axle Washer 3 Hubcap Peg Side Up 1 2 Scrap Block of Wood • Turn the frame upside down. • Insert the straight axle through the holes in the rear of the frame. Hole Hole Frame Straight Axle 3 Bottom View Cap Nut Rear Wheel Indented Side Up Assembled Rear Wheel Straight Axle Washer Hubcap Peg Side Down Frame 4 Bottom View Scrap Block of Wood • Turn the frame on its side with the exposed end of the straight axle up. • Place the assembled rear wheel on the scrap block of wood. • Slide a washer onto the straight axle. • Slide a rear wheel (indented side up) onto the end of the straight axle. • Slide a hubcap (peg side down) onto the straight axle. • Fit a cap nut on the end of the straight axle. • Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle. • Set the frame assembly aside. • Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal hub. Pedal Hub Pedal Axle Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. Hole Pedal Axle Pedal Hubs Front Wheel • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. Pedal Hubs 5 6 7 Assembly Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. 8 9 Front Wheel Assembly Scrap Block of Wood Pedal Axle Pedal 10 • Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal hub. Pedal Hub Pedal Axle Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. Hole Pedal Axle Pedal Hubs Front Wheel • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. Pedal Hubs 5 6 7 Assembly Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. 8 9 Front Wheel Assembly Scrap Block of Wood Pedal Axle Pedal 10 • Place a scrap block of wood under the front wheel assembly. • Fit a pedal on the pedal axle. • Tap the pedal with a hammer until it is secure. • Repeat this procedure to attach the other pedal to the Fisher-Price, Inc., a subsidiary of Mattel, Inc. other end of the pedal axle. East Aurora, New York 14052, U.S.A. © 2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. BARBIE is a U. S. trademark of Mattel, Inc. Printed in Mexico 72639c-0920 4 Assembly Fork Arm...