Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
dult assemb is required. A AAdult assembl lly yy is required. ools required for assemb Phillips Screwd ve T TTools required for assembl lly yy: :: Phillips Screwdr rri iiver rr, ,, Hammer and Scrap Block of ood (not included). Hammer and Scrap Block of W WWood (not included). ge:2 5 year A AAge: 2-5 years ss eight limit: 55 lbs (25 kg). W WWeight limit: 55 lbs (25 kg). Consumer Information IMPORTANT! • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry cloth before assembly. WARNING CAUTION To avoid serious injury: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. This product contains small parts in its unassembled state. Adult assembly is required. Parts Seat 2 Fork Covers Front Wheel Assembly Fork Handlebar Back Straight Axle 2 Bushings 2 Wheel Hubs 2 Wheel Caps Note: Some parts shown are assembled to both sides of the trike. *We’ve included one extra .354" cap nut for your convenience. Note: Tighten and loosen the screws with a Phillips screwdriver. Do not over-tighten the screws. 4 Pedal Hubs 2 Rear Wheels Part not shown: Label Sheet ALL SHOWN ACTUAL SIZE Handlebar Front Frame #8 x 2." Screw - 1 #8 x ." Screw - 6 .354" Cap Nut - 2* .354" 2 Assembly Frame Seat PUSH1 • Fit the seat onto the frame. • Push firmly near the back end of the seat to "snap" it into place. Straight Axle Assembly Bottom View 3 • Turn the frame upside down. • Insert the straight axle assembly through the holes in the rear of the frame. Wheel Hub (Flat Side Down) Bushing (Grooved Side Down) Straight Axle Straight Axle Cap Nut Rear Wheel (Indented Side Down) 2 .354" • Turn the assembly upright. • Slide a bushing, smooth side first, onto the end of the straight axle. • Slide a wheel, flat side fi rst, onto the end of the straight axle. • Slide a wheel hub, pointed end first, onto the end of the straight axle. Bushing (Smooth Side First) Wheel Hub (Pointed End First) Wheel (Flat Side First) Straight Axle 4 • Place one end of the straight axle into the cap nut. Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a wheel hub, flat side down, onto the straight axle. • Slide a rear wheel, indented side down, onto the straight axle. • Slide a bushing, grooved side down, onto the straight axle. 3 Assembly 5 .354" • Fit the cap nut on the end of the straight axle. • Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the straight axle. Hint:You may need the help of another adult to hold the other end of the straight axle in place. Wheel Hub Wheel Cap 6 • Fit the tabs on the wheel cap into the slots in the wheel hub. Push to "snap" the wheel cap in place. • Repeat this procedure to attach the other wheel cap to the other wheel hub. Pedal Hub 7 Pedal Hub Pedal Axle Tab • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. • Press the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Repeat this procedure on the other side with the other two pedal hubs. Fork Arms Pedal Axle Groove Fork Cover Front Wheel Assembly 8 • Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • Insert two #8 x ." screws into the fork cover and tighten. • Repeat this procedure to attach the other fork cover to the other fork arm. 4 Label Decoration Consumer Information Right Side Left Side 2 1 6 4 3 5 7 • Periodically, check the plastic parts and if broken or cracked, dispose of them properly. • Periodically, check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue. IMPORTANT! It is a good practice to start training children very young regarding the importance of helmet use. When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes a habit for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets. CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Out...