Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
If the unit cannot be positioned in an area that will allow the air to “flow through,” it will still cool, but the effect will be lessened. NOTE AND CAUTIONARY INFORMATION: This appliance is intended for use in a home or small environment. Any other use (e.g., outdoors) is not recommended by the manufacturer and may cause electrical shocks or other injury to person or When using electrical appliances, basic should always be followed: 1. Extreme care should be taken when by or near children and the elderly, product is left operating and unattended. 2. Before operating the product packaging and check to 3. DO NOT let children plastic bags. 4. DO NOT operate or plug. 1 5. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit as this may void the warranty. 6. Check the household voltage to ensure it matches the appliance’s rate specification. 7. DO NOT cover the air inlet or outlet. 8. Always unplug the product before refilling the water tank. 9. Always unplug the product when not in use. To disconnect from the power supply, grip the plug and pull it from the power socket. Never pull by the plug out by the cord. 10. This product is not intended for use in wet or damp locations. Never locate the product where it may fall into a bathtub or other water container. DO NOT use in bathrooms or outdoors. When not in use always store in a dry area. 11. DO NOT run the power cord under carpeting or cover with rugs or runners. Keep the cord away from areas where it may be tripped over. 12. Avoid the use of an extension cord. 13. DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire. 14. DO NOT use the product in areas near gasoline, paint, other inflammable goods or objects. 15. If the supply cord is damaged it must be replaced manufacturer or an authorized service center. 16. Unplug or disconnect the appliance from the power before servicing and cleaning. MAINTENANCE • Before you clean the appliance, switch it off, remove the plug from the power socket and wait until the product has cooled down. • Use a damp cloth to clean the product housing. • Do not use water, detergents, abrasive cleaning liquids or chemical agents (e.g., Alcohol, Gasoline etc…) to clean the appliance. • Store the unit in its original packaging in a dry, dust free area during the off season. 2 7 TIMER OPERATION • The TIMER can be used to switch the product off after a selected number of hours. • Turn the unit on. • Select the desired operating mode, speed, etc. • Press the TIMER button once and the product will switch off after 1 hour. Press the button again for 2 hours, again for 3 hours etc. The maximum timer setting is 8 hours. The LED display will show the number of hours the timer is currently set for. • To cancel the Timer setting press the TIMER button again until all the timer indicators are dark. REMOTE OPERATION .. POWER: This button turns the unit ON or OFF. .. MODE: This button turns the COOL MODE on or off. .. SPEED: This button toggles through the fan speeds .. TIMER: This button controls the TIMER .. SWING: This button adjusts the louver swing. a) To replace the batteries, remove the cover of the battery compartment. Install two AAA 1.5V Batteries, and then replace the cover. b) The effective operating range of the remote control is about 13 feet in front of the unit and about 10 feet on the side. c) Take out the batteries if the remote will not be used for a long period. d) Replace the batteries as soon as the remote control does not work normally. e) Do not allow children to use the remote as a toy. 6 SPECIFICATIONS Model No. EAC420 Voltage 120V Frequency 60Hz Wattage 250W Net Weight 23 pounds PARTS DESCRIPTION 1 Top cover 9 Air vent 2 Handle 10 Front cover 3 Horizontal louvers 11 Water level 4 Left side 12 Remote control 5 Front cover ornament 13 Remote control holder 6 Power cord hole 14 Right side 7 Caster wheels 15 Water inlet panel 8 Top cover lid 16 Drain 3 CONTROL PANE L OPERATING INSTRUCTIONS • Choose a suitable location for your unit; as noted in the first section, the unit will produce greater cooling when located in an area in which air can “flow through.” • This unit can be operated by the controls on the control panel or with the remote control COOLING OPERATION • Remove the plug from the electrical socket. • Open the top cover lid or water inlet panel and pour clean water into tank. The water inlet panel will allow you to pour more water in, faster. Additionally, some increase the cooling performance. Then power supply. • Press the POWER button to turn start at MEDIUM speed, and after few seconds will switch to LOW speed. • Press the SPEED button increase or decrease the speed. 4 • Press the MODE button to select the COOL MODE, as indicated by the LED. The full effect of this mode will begin to be felt after about 3 minutes. • Once all the water in the tank has been used turn the product OFF, u...