Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
The damper is opened by air pressure differential and closed by gravity. Ratings (See page 2 for specific limitations) Pressure: 2.5 in. wg (622 Pa) - differential pressure. Velocity: 2000 fpm (10.2 m/s) Temperature: 180°F (82°C) Standard Construction Frame: 6063T5 extruded aluminum. (0.063 in. [1.6mm] thickness) Blades: 6063T5 extruded aluminum. (0.050 in. [1.3mm] thickness) Axle Bearings: Synthetic polycarbonate sleeve type. Linkage: V8 in. (3mm) aluminum. Blade Seals: Vinyl. *W & H dimensions furnished approximately 1/4 in. (6mm) under size. NOTE: Optional counterbalance weights shown. Size Limitations Minimum Size (without weights): 4 in.W x 4 in. H (102mm x 102mm) Minimum Size (with weights): 6 in. W x 8 in. H (152mm x 203mm) Maximum Size: 40 in. W x 52 in. H (1016mm x 1321mm) Options and Accessories • 11/2 in. (38mm) Flange On Discharge: ES-31 • 11/2 in. (38mm) Flange On Intake: ES-32 m -> <- 2" Max. -> <- 2" Max. U— U— • Counterbalance Weights 2 *- ' -» 2 * • Pull Chain Actuator ES-30 ES-31 ES-32 • Wing Nut Actuator No Flange Flange On Discharge Flange On Intake ES-30 ES-31 ES-32 No Flange Flange on Discharge Flange on Intake Note: Counterbalance weights may require field adjustment. Instructions are available at Performance Data ES-30 Leakage Leakage testing was conducted in accordance with AMCA Standard 500-D and is expressed as CFM per sq. ft. of damper face area. All data has been corrected to represent standard air at 0.075 lb/ft3 (1.201 kg/m3). Pressure Drop Performance data results from testing a 36” x 36” damper in accordance with AMCA Standard 500-D using Figure 5.5 (no duct either side). All data has been corrected to represent standard air at 0.075 lb/ft3 (1.201 kg/m3). Leakage 36” x 36” Damper 1 2 3 4 5 6 7 8 9io 20 30 40 50 60 7080 gQ100 150 Air Leakage in CFM/Sq. Ft. Pressure Drop 36” x 36” Damper 1 2 3 4 5 6 7 8 910 2 3 4 5 6 7 8 910 2 3 4 5 6 7 8 910 x10 x100 x1000 Velocity (fpm) Operational Data ÆP in. wc (Pa) ' Velocity fpm (m/s) Without We i g hts Blades Start to Open 0.05 (12) 35 (.18) Blades Fully Open 0.27 (67) 1000 (5.1) With Weights Blades Start to Open 0.015 (3.7) 15 (.08) Blades Fully Open 0.13 (32) 600 (3.1) Specifications Backdraft dampers meeting the following specifications shall be furnished and installed where shown on plans and/ or as described in schedules. Dampers shall consist of: 6063T5 extruded aluminum channel frame (0.063 in. [1.6mm] thick) with 2 in. (51mm) depth; blades from 0.050 in. (1.3mm) 6063T5 extruded aluminum; synthetic polycarbonate axle bearings; damper shall be equipped with extruded vinyl blade seals; and internal 1/8 in. (3mm) aluminum linkage. Damper manufacturer’s printed application and performance data including pressure, velocity and temperature limitations shall be submitted for approval showing damper suitable for pressures to 2.5 in. wg (623 Pa), velocities to 2000 fpm (10.2m/s) and temperatures to 180°F (82°C). Testing and ratings to be in accordance with AMCA Standard 500-D. Basis of design is Greenheck model ES-30. [~RGREENHECK P.O. Box 410' Schofield, WI544760410 • 715.359.6171 ■greenheck.com Copyright © 2008 Greenheck Fan Corporation ES-30 Rev. 3 Aug 2008...