Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
to 10 ft. Ceiling Heights Note: The vent hood canopy extends forward 5-7/8". The vent hood must be installed 24" min., and 30" max. above the cooking surface. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. The duct cover is sized to reach 8 ft. to 10 ft. ceiling heights. The hood installation height, from the cooking surface to the bottom of the hood, depends upon ceiling height. Installation Information: Before installing, consult installation instructions packed with product, or available online at monogram.com, for current dimensional data. R Listed by Underwriters Laboratories For answers to your Monogram,® GE Profi le™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Specification Created 8/04 ZV800SJ/BJ – GE Monogram™ 36" Chimney Hood Wall Mount Installations Installation Below a Cabinet These hoods may be installed onto a wall or below a wall cabinet. • Telescopic duct covers are provided to conceal the ductwork, running to the ceiling. • This hood can be installed for recirculation operation. No kits required. 36” Min. 24” Min. 30” Max. Theventhoodmustbeinstalled24"min.and30"max.abovethecookingsurface.Thehoodinstallationheight,fromthecookingsurfacetothebottomofthehood,dependsuponceilingheight. 24” Min. *20” Min. *The cabinet must measure at least 20" from the bottom frame to the inside top. The hood housing will occupy the interior cabinet space. Installation Below A Wall Cabinet Order a cabinet that is at least 20" high from the bottom frame to the inside top. The cabinet must be at least 12" deep. • The hood installation height is determined by the ceiling height. • The hood installation height must be 24" Min. above the cooking surface. R Listed by Underwriters Laboratories For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, Specification Created 8/04 800.626.2000. ZV800SJ/BJ – GE Monogram™ 36" Chimney Hood Cabinet Requirements This hood may be installed beneath a wall-mounted cabinet. • Both vented and recirculating operation can be accomplished in an under-cabinet installation. • If the cabinet has been installed, it must be removed so that wall framing supports can be added. Ceiling The cabinet must be at least 20" high between the bottom frame and *25-1/2" Recommended24” Min. 30” Max. 20” Min. the inside top. A custom cabinet or modifications to a different size cabinet may be required to accommodate the hood housing. • The cabinet must be 36" wide. • The cabinet must be fi rmly secured to wall studs or the added framing support and capable of supporting 100 pounds. • Tape the template in position along the penciled line. Check to be sure the template is level. • Use the level to draw a line straight up, from the centerline on the Ductwork, Wiring • Determine the exact location of the vent hood. • Locate the Rear Wall Template packed with the literature. • Measure 36" from the floor to the top of the cooking surface. Add the pre-determined hood installation height. Mark that location. • Use a level to draw a straight pencil line on the wall. 3-3/4” centerline to wall 19-1/2" " " 19-1/2” 11-3/4” 11” REAR WALL TEMPLATE CL 49-80271 JR 07-04 Drill 1/8" Pilot Holes Drill 1/8" Pilot Holes Drill 1/8" Pilot Holes Drill 1/8" Pilot Holes Drill 1/8" Pilot Holes Drill 1/8" Pilot Holes ALIGN BOTTOM EDGE WITH PENCIL LINE INDICATING BOTTOM OF THE HOOD. 5-1/16" 9-5/8" 8-1/8" 2-1/16" 13-3/4" 12-3/4" R Listed by Underwriters Laboratories For answers to your Monogram,® GE Profi le™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. template to the ceiling. • Measure 3-3/34" from the back wall to the centerline of a 6-1/2" hole on the ceiling. NOTE: If drywall is not present, add drywall thickness to the 3-3/4" dimension. House Wiring Location: • The junction box is located on the top right side of the hood. • Wiring should enter the back wall 20" to 26" above the bottom of the hood, and within 4" of the right side of the centerline. Wiring should enter at least 4" above the bracket on the right side. Specification Created 8/04 ZV800SJ/BJ – GE Monogram™ 36" Chimney Hood ZV800SJSS Features and Benefits • Under-cabinet or stand-alone installation – The chimney hood installs beneath a cabinet, above most cooktops and ranges. For a more contemporary look, the system can be wall-mounted with matching 8-to-10-ft. duct cover. • Low-profile design. High-impact style – The retractable glass canopy is sleekly styled with a streamlined design, seamlessly finished edges and front-mounted touch controls. • Powerful ventilation – A four-speed, 500-CFM fan blower with boost option captures the smoke and steam produced by high-performance cooking equipment. • Multilevel halogen lighting – Six levels of intensity, from accent to ambient settings, allow you to choose the lighting to match the...