Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Hotpoint, modelo HS63X

Fabricar: Hotpoint
Tamaño del archivo: 1.15 mb
Nombre del archivo: 3e874ba1-6221-4e45-be7f-7c450cf3b3db.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Speed increase button Repeatedly pressing the button will increase the motor speed until reaching the maximum speed (12th speed). Boost speed button Activates the motor at boost speed (13th speed) for 10 minutes, after which the motor goes back to running at the speed set previously. 6 Maintenance ! Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. ! To avoid possible risks of fire always comply with the indicated instructions when cleaning grease filters and when removing grease deposits from the appliance. Careful maintenance will assure good functioning and good efficiency over time. Cleaning the hood Any fat deposits should be removed from the appliance periodically depending on amount of use (at least every 2 months). Avoid using abrasive or corrosive products. To clean painted appliances on the outside, use a cloth dipped in lukewarm water and neutral detergent. To clean steel, copper or brass appliances on the outside, it is always best to use specific products, following the instructions on the products themselves. To clean the inside of the appliance, use a cloth (or brush) dipped in denatured ethyl alcohol. Cleaning the grease filters To remove the grease filters, push the catch near the handle towards the inside and pull the filter downwards. Wash the filters by hand or in the dishwasher using a neutral detergent. If they are washed in the dishwasher, any loss of colour will not jeopardise functioning of the filters in any way. Clean the grease filters every 2 months on average depending on how heavily the hood is used. Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat. Replace the charcoal filter with one of the same type by carrying out the operations in reverse order. Replace the charcoal filter on average every 6 months depending on how heavily the hood is used. Replacing the lamps Pay particular ATTENTION when carrying out this operation and remember to remove the voltage. After having removed the grease filters, remove the light fitting, operating manually from inside the hood. Apply light pressure to the mobile part of the 2 retainers and release it from the outside. GB Unscrew the bulb and replace it with a bulbof the same type. Re-assemble the light fitting by pushing it into its seatfrom the outside. 7 Precautions and tips 04307518 GB General safety ! The distance between the supporting surface for the cooking vessels on the hob and the lower part of the hood must be at least 65 cm. If the instructions for installation for the hob specify a greater distance, this has to be taken into account. ! The hoods in insulation class 2 (model HS63X) do not need to be connected to earth. ! The hoods in insulation class 1 (Mod. HS73XHS93X- HSD93I): must be connected to earth. When making the electrical connections, check that the current socket has a ground connection. ! Avoid using materials ...

Otros modelos de este manual:
Los aficionados - HS93I (1.15 mb)
Los aficionados - HS93X (1.15 mb)
Los aficionados - HS73X (1.15 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría