Votos - 0, Puntuación media: 5
(
)
)
|
Resumen del manual
Afterwards, the filter operating hours counter must be reset. ^ Press the charcoal filter touch control for about 3 seconds. The indicator lamp for the touch control will go out. Reading the filter operating hours counter To check the percentage of time set already used: ^ Press the On/Off touch control to switch the fan on. ^ Press and hold the grease filter or the charcoal filter touch control. One or more of the indicator lamps for the – /+ touch controls will flash. The number of flashing lamps shows the percentage of the operating time which has already been used up. 1 lamp = 25 % 2 lamps = 50 % 3 lamps = 75 % 4 lamps = 100 % The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut. Use Filter operating hours counter You can set the operating hours counter to suit the type of cooking you do. – Select a short time if you roast or fry a lot. – If you use very little fat for cooking, select a longer time. – If you only cook occasionally we recommend that you still select a short time, because grease which has built up gradually over a long period of time will harden on the grease filter and make cleaning more difficult. Altering the grease filter operating hours counter The operating hours counter for the grease filter is set at 30 hours. The time set can be lengthened or shortened: you can choose 20, 30, 40 or 50 hours. ^ Press the On/Off touch control to switch the fan off. ^ Press the run-on option touch control and the grease filter touch control at the same time. The indicator lamp for the grease filter touch control and one of the – / + touch control lamps will flash. The – /+ control lamps show the time which has been set: 1st lamp from the left = 20 hours 2nd lamp from the left = 30 hours 3rd lamp from the left = 40 hours 4th lamp from the left = 50 hours ^ Use the – /+ touch controls to select the desired time. ^ Confirm the selection by pressing the grease filter touch control. All the indicator lamps will go out. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data. Use Setting and altering the charcoal filter operating hours counter (with recirculation mode) The charcoal filter is needed for recirculation mode. The cooker hood is set at the factory for extraction mode. On delivery, the operating hours counter for the charcoal filter is set to unlimited. For recirculation mode, the operating hours counter needs to be set to the required time: ^ Press the On/Off touch control to switch the fan off. ^ Press the run-on option touch control and the charcoal filter touch control at the same time. The indicator lamp for the charcoal filter touch control and one of the lamps above the – / + touch controls will flash. The – /+ control lamps show the time which has been set: 1st lamp from the left = 120 hours 2nd lamp from the left = 180 hours 3rd lamp from the left = 240 hours 4th lamp from the left = unlimited ^ Use the – /+ touch controls to select the desired time. ^ Confirm the selection by pressing the charcoal filter touch control. All the indicator lamps will go out. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data. Use Adjusting the height of the canopy The height adjustment feature on the canopy can be used to – – adapt the height of the hood to suit the installation conditions. – adjust the working area underneath the hood to the height of the user. – maximise vapour extraction by lowering the canopy during particularly intensive cooking. – create more working space above the hob by raising the canopy when required. The height of the canopy can be adjusted by up to 300 mm in air extraction mode, and by up to 250 mm in recirculation mode. ^ The canopy can be raised or lowered by touching the Up or Down controls briefly. ^ Pressing the control again stops the canopy. If it is not stopped, the canopy will automatically be raised or lowered to its fullest extent. Repeated use of the height adjustment feature over several minutes will cause it to cut out. It can be used again after a pause. Cleaning and care Before carrying out any cleaning or maintenance work, disconnect the cooker hood from the mains supply. Ensure that: – it is switched off at the isolator, or – it is switched off at the wall socket and the plug removed, or – the fuse is withdrawn from the fused spur connection unit, or – the mains fuse is withdrawn, or – the screw-out fuse is removed (in countries where this is applicable). Housing General notes The surfaces and controls are susceptible to scratches and abrasions. Please observe the following cleaning instructions. ^ All external surfaces and controls can be cleaned using warm water with a little washing-up liquid applied with a well wrung-out soft sponge or cloth. ^ Wipe the surfaces dry using a soft cloth. Do not use too much water when cleaning the controls. Water could penetrate into...
Otros modelos de este manual:Los aficionados - DA 420 V (832.63 kb)
Los aficionados - DA 420 V EXT (832.63 kb)
Los aficionados - DA 424 V EXT (832.63 kb)