Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
(51 mm) 17-1/4 in. (438 mm) 17-1/2 in. (444 mm) Dia. centered 3-3/4 in. (95 mm) 3 in. (76 mm) 28-1/4 in. (718 mm) * * * 17-1/2 in. (444 mm) Dia. centered * * See Table 1 for measurements * Figure 4 Shroud Dimensions • Installation of the Shroud • Center the hole in the bottom pan (if required) of the shroud over the termination cap and lower the shroud down to the chase top. • Be sure to keep the shroud centered over the chimney termination and fasten the shroud to the chase top with screws. • Be sure to caulk or seal around the screw heads to prevent leaks. Note: To protect against the effect of corrosion on those parts exposed to the weather, the termination cap can be painted with a rustresistant paint. • TABLE 1 Shroud TS345/T445 (Top Vent) TR342/TR344 TR442/TR444 TV342 TR342/TR344* TR442/TR444* (* with TR-TVK installed) TR11/TR11T TV11/TV11T TR11/TR11T* (* with TR-TVK installed) OPEN TOP with solid sides and 3 in. (76 mm) opening at the bottom Mnimum Base Dimensions 23 in. x 23 in. (584 x 584 mm) 28 x 28 in. (711 x 711 mm) with Radiation Shield 26 x 26 in. (660 x 660 mm) 32 x 32 in. (813 x 813 mm) with Radiation Shield 26 x 26 in. (660 x 660 mm) Minimum Top Dimensions 20 x 20 in. (508 x 508 mm) 25 x 25 in. (635 x 635 mm) 23 x 23 in. (584 x 584 mm) 29 x 29 in. (737 x 737 mm) 23 x 23 in. (584 x 584 mm) MAILBOX STYLE with open ends and 3 in. (76 mm) opening at the bottom of the sides. Minimum Base Dimensions N/A 26.5 x 28 in. (673 x 711 mm) with Radiation Shield 28 x 30 in. (711 x 762 mm) 34 x 34 in. (864 x 864 mm) with Radiation Shield 28 x 30 in. (711 x 762 mm) with Radiation Shield or 34 x 34 in. (864 x 864 mm) Minimum Height N/A 28 1/4 in. (718 mm) 27 1/2 in. (699 mm) 28 1/4 in. (718 mm) 27 1/2 in. (699 mm) ROOFED STYLE with 12 x 22 in. (264 sq. in.) (305 x 559 mm) opening on each side and 3 in. (76 mm) space between the radiation shield and chase top. Minimum Base Dimensions N/A 27 x 27 in. (686 x 686 mm) with Radiation Shield 27 x 27 in. (686 x 686 mm) with Radiation Shield 34 x 34 in. (864 x 864 mm) with Radiation Shield 34 x 34 in. (864 x 864 mm) with Radiation Shield Minimum Height N/A 23 in. (584 mm) 23 in. (584 mm) 23 in. (584 mm) 23 in. (584 mm) Minimum Height is measured from the bottom of the termination cap: Minimum height is established with the bottom of the termination cap 7 in. (178 mm) above the chase top. Minimum height must increase accordingly for any height above 7 in. (178 mm). All dimensions are INSIDE dimensions. Hearth & Home Technologies Inc. • TR342/TR344 Term Cap • 31445 Rev H • 03/06 ...
Otros modelos de este manual:Los aficionados - TR342 (643.29 kb)
Los aficionados - TR344 (643.29 kb)