Iniciar sesión:
Votos - 1, Puntuación media: 4 ( )

Manual de usuario Faber, modelo 630000815

Fabricar: Faber
Tamaño del archivo: 206.02 kb
Nombre del archivo: axiaisolaspec.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


The ductless Axia Isola chimney can be adjusted for ceilings between 7' 10 5/ 8" and 8' 10 5/ 8" depending on the distance between the bottom of the hood and the cooktop (distance x in above DUCTLESS diagram). Pre-Planning Your Ductwork_ Make your ductrun as straight and short as possible. The ductrun should not exceed 35 equivalent feet if ducted with the required minimum of 6" round duct. Count 45° angles as 3 feet, 90° elbows as 5 feet, and 90° flat elbows as 12 feet. For best results, use no more than three 90° elbows. Make sure that there is a minimum of 24" of straight duct between elbows if more than one is used. Do not install two elbows together. If you must elbow right away, do it as far away from the hood's exhaust opening as possible. t ^¡g^y recommencjecj that professional style cooking always be vented to the outside. WARNING! Product specifications are subject to change without notification. Consult the installation instructions Rev.06/08 before you begin installing this rangehood. Ductless Installations* For installations where ductwork is impossible or highly impractical, a ductless conversion kit is available. A charcoal filter, which attaches under the blower assembly, absorbs smoke and odors. A ductless diverter assembly directs the air out to a lower chimney with a vent grate cut into the back. x x 5/8...

Otros modelos de este manual:
Los aficionados - 630001068 (206.02 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría