Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
• Fix the pipe in position using sufficient pipe clamps (not supplied). • Ensure that the activated charcoal filters have been inserted. ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. • When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks. USE Control Panel L Light Switches the lighting system on and off. M Motor Switches the extractor motor on and off. V Speed Sets the operating speed of the extractor. GB 14 GB 15 A A MAINTENANCE Grease filters CLEANING METAL SELF-SUPPORTING GREASE FILTERS • The filters must be cleaned every two months of operation, or more frequently with heavy usage. • Remove the filters one at a time, after disconnecting the relative fastening elements. • Wash the filters, taking care not to bend them. Allow them to dry before refitting. • When refitting the filters, make sure that the handle is visible on the outside. Odour filters (Recirculation version) REPLACING ACTIVATED CHARCOAL FILTERS • These filters are not washable and cannot be regenerated, and must be replaced approximately every four months of operation, or more frequently with heavy usage. • Dismantle the ducting support pulling the two pommels A simultaneously. • Remove the saturated activated carbon filters by releasing the fixing hooks. • Fit the new filters by hooking them into their seating. • Close the ducting support by pushing and connecting the two pommels A. Lighting LIGHT REPLACEMENT • 20 W halogen light. • Dismantle the ducting support pulling the two pommels A simultaneously. • Extract the Lamp from the Support. • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. • Close the ducting support by pushing and connecting the two pommels A. Quest’apparecchio e conforme alla norma europea sulla bassa tensione C.E.E. 73/23 relativa alla sicurezza elettrica e alle norme europee: C.E.E. 89/336 relativa alla compatibilita elettromagnetica e C.E.E. 93/68 relativa alla marcatura CE. This appliance conforms to European Low Voltage Directive 73/23/CEE governing electrical safety, European Directive 89/336/ CEE on Electromagnetic Compatibility and Directive 93/68/CEE regarding CE Marking. Dieses Gerat entspricht folgenden EG-Richtlinien: Niederspannungsrichtlinie EWG 73/23 hinsichtlich elektrischer Sicherheit, Richtlinie Elektromagnetische Vertraglichkeit EWG 89/336 und Richtlinie EWG 93/68 hinsichtlich der CE-Kennzeichnung. Cet appareil est conforme a la norme europeenne en matiere de basse tension C.E.E. 73/23 de securite electrique ainsi qu’aux normes europeennes : C.E.E. 89/336 en matiere de compatibilite electromagnetique et C.E.E. 93/68 en matiere de label CE. Dit apparaat voldoet aan de Europese laagspanningsnorm 73/23/EEG inzake de elektrische veiligheid en de Europese normen: 89/336/EEG inzake de elektromagnetische compatibiliteit en 93/68/EEG inzake de CE-markering. Este aparato es conforme con la normativa europea sobre baja tension C.E.E. 73/23 correspondiente a la seguridad electrica y a las normativas europeas: C.E.E. 89/336 sobre la compatibilidad electromagnetica e C.E.E. 93/68 respeitante a marcacao CE. 436001633 01 - 021210 ...
Otros modelos de este manual:Los aficionados - KSEG56X (575.58 kb)