Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Для того чтобы установить низкую скорость (LOW), нажмите эту кнопку один раз; для настройки средней скорости (MEDIUM), нажмите дважды, для установки высокой скорости (HIGH), нажмите кнопку трижды. Нажав кнопку четыре раза, Вы возвращаетесь к начальному этапу настройки. TIMER (ТАЙМЕР): Данный вентилятор снабжен системой установки времени работы от 0.5 ч до 7.5 ч, при этом каждое нажатие кнопки соответствует шагу в 0.5 ч (0.5 ч, 1 ч, 1.5 Ч...7.5 ч). Для настройки таймера, нажмите кнопку ТАЙМЕР (TIMER) на пульте дистанционного управления. Для установки желаемого времени работы вентилятора нажмите кнопку нужное количество раз. 6 ENGLISH Thank you for purchasing Remote Control Stand Fan! Please read this instruction manual carefully before use this product and save it for further inquiry. PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken to reduce the risk of fire, electric shock, and other undesired accidents, including the following: 1) Read all instructions before using the appliance. 2) To protect against electrical hazards, DO NOT immerse unit, plug or cord in water or spray with other liquids. DO NOT use near water. 3) Close supervision is necessary when any appliance is used by or near children and disabled people. 4) Always unplug the fan before moving it, putting on or taking off parts, cleaning it, or whenever the fan is not is use. Be sure to pull by the plug and not the cord. 5) Avoid contact with moving parts. DO NOT operate without fan grills properly in place. 6) DO NOT operate in the presence of explosive and/or flammable fumes. 7) DO NOT place fan or any parts near heated surfaces and open flames. 8) DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. 9) Use appliance only for intended household use as described in this manual. Any other use and use of attachments not recommended the appliance manufacturer may cause hazards. 10) DO NOT use outdoors. 11) Keep the cord out of heavy traffic areas. DO NOT let the cord hang over the edge of a table or counter. To avoid fire hazard, NEVER contact with hot surfaces. 12) To disconnect, grip plug and pull from wall outlet. Never yank on cord. 13) Always use on a dry, level surface. 14) This product is intended for household use ONLY and not for commercial or industrial applications. 15) DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel 16) WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. NOTE: BEFORE ASSEMBLY, PLEASE CHECK THE CONTENTS OF THE PACKAGE AND THE RECOMMENDED VOLTAGE. Step 1: Insert lower pole into the base until the threaded end of the pole protrudes through the opening at the base. Secure the base and pole together by tightening the base nut to the threaded portion of the pole. NOTE: Please make sure that the power wire which is connected with the lower pole go through the opening at the base and rest properly in the wire groove before you tighten the base nut. Step 2: Turn the fan blade nut clockwise and the rear grill mounting-ring counter-clockwise to undo them. Position the rear grill over the motor shaft; make sure the rear grill fits securely against the motor housing. Secure the rear grill in its place using the rear grill mounting-ring. Turn this ring clockwise and tighten firmly. Step 3: Slide the fan blade firmly onto the motor shaft. Make sure that the pin through the motor shaft aligns with the groove in the back centre of the fan blade. Secure the fan blade onto the motor shaft by firmly tightening the fan blade NOTE: TURN THE FAN BLADE NUT COUNTER-CLOCKWISE. Step 4: Align the grill hub on the front grill, and press grills horizontally against each other. Rest the front grill on the hook of the rear grill. Place grill ring over attached front and rear grills and tighten the connecting lock. Make sure to fit the grooves of the grill ring over the edge of the front and rear grills. OPERATING INSTRUCTIONS Step 1: Set the fan base on a dry level surface. Step 2: Plug cord into any standard 220V AC outlet. Step 3: Insert 2 AAA batteries into the back of the remote control according to the diagram shown inside. ON/OF: To turn the fan on, press the POWER button on the remote control or on the touch-key pad, press the button a second time to turn off the fan. SPEED: To adjust the speed, press either the SPEED button on the remote control or on the SPEED button on the touch-key pad. Press this button first for LOW, again for MEDIUM, and a third time for HIGH. Press a fourth tim...