Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLeaSe dO nOt retUrn tHiS PrOdUCt tO anY OF tHeSe addreSSeS Or tO tHe PLaCe OF PUrCHaSe. breeze MODEL: BT014 Mini TOWER FAN Instruction Leaflet Read instructions before operating. Retain for future reference. Questions? Comments? Call 1-800-253-2764 in North America. © 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. 129492-000-000 SPR-120308 Printed In China BT014-U_Eng.indd 1 12/3/08 12:05:42 PM PLeaSe read and SaVe tHeSe imPOrtant SaFetY inStrUCtiOnS F eat U re S -OP erati O n S CL eanin G and maintenan C e When using electrical appliances, basic safety precautions should always be taken including the following: 1. Read all instructions before using this appliance. 2. Use fan only for purposes described in the instruction manual. 3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids. Plug the appliance directly into a 120V AC electrical outlet. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. 6. Avoid contact with moving parts. 7. Do not operate in the presence of explosive and/or flammable fumes. 8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. 9. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. 10. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards. 11. Do not use outdoors. 12. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas. 13. To disconnect, grip plug and pull from wall outlet. Never yank on cord. 14. Always use on a dry, level surface. 15. Do not operate fan until fully assembled with all parts properly in place. 16. This product is intended for household use ONLY and not for commercial or industrial applications. 17. WarninG: To reduce the risk of electrical shock injury to persons, do not use in window. 18. WarninG: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. PLeaSe read and SaVe tHeSe imPOrtant SaFetY inStrUCtiOnS tHiS aPPLianCe HaS a POLarized PLUG (one blade is wider than the other). to reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug. if it still does not fit, contact a qualified electrician to install the proper outlet. dO nOt attemPt tO mOdiFY tHiS PLUG Or deFeat tHiS SaFetY FeatUre in anY WaY. aSSemBLY inStrUCtiOnS: (See FiGUre 1) Your fan comes fully assembled and is ready for use. OPeratinG inStrUCtiOnS: (See FiGUre 2) 1. Set the fan on a dry level surface. 2. Plug power cord into any standard 120V AC outlet. 3. To turn the fan on, press either speed control button. 1-Low, 2=high. 4. To turn the fan off press the on/off button. 5. To turn on the oscillation feature press the oscillation button once. To turn the oscillation feature off press the oscillation button once. Figure 2 1 2 3 Figure 1 1. On/Off Button 2. Speed Control Buttons 1 = Low speed 2 = High speed 3. Oscillation Button CLeaninG/maintenanCe inStrUCtiOnS: Follow these instructions to correctly and safely care for your fan. Please remember: • Always unplug the fan before cleaning. • Do not allow water to drip on or enter into fan housing. • Be sure to use a soft cloth moistened with a mild soap solution. • Do not use gasoline, thinner or benzene as a cleaner. Fan CLeaninG: Clean the fan grill, housing and base with a soft, damp cloth. Do not attempt to remove the fan blade. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water. Fan StOraGe: When storing your fan in the off season, it is important to keep it in a safe dry location. It is important to protect the fan head from dust. WE STRONGLY RECOMMEND USING THE ORIGINAL BOx FROM PURCHASE. If you have any questions regarding your product or would like to learn more about other Bionaire® products, please contact our Consumer Service Department at 1-800-253-2764 or visit our website at BT014-U_Eng.indd 2 12/3/08 12:...