Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
The dust hood adjusts vertically from 29" to 49". Figure 1. Model T10117 identification. Inventory After removing the contents of the shipping package, lay them out and refer to the Parts Breakdown on the back page to inventory the components. If you need help with your new dust hood, call our Tech Support at: (570) 546-9663. Assembly Refer to Figure 1 and the Parts Breakdown illustration to aid you in the following assembly procedure. Tools Needed Qty Wrench or Socket 10, 14mm....................1 Each To assemble your dust hood: 1. Thread the four foot pads into the base. 2. Secure the vertical support assembly onto the base by threading the %"-16 x 1" hex bolt, lock washer, and flat washer through the bottom of the base and into the support assembly. 3. Install the angle pivot bracket onto the top of the vertical support assembly with the two 1/4"-20 x V2" hex bolts. 4. Use the %"-16 x 11/2" knob to install the dust tube onto the angle pivot bracket. 5. Slide the hood mounting tube onto the dust tube and secure it in place with one of the 1/4"-20 x %" knobs. 6. Insert the dust hood into the mounting tube, then secure it in place with the remaining 1/4"-20 x %" knob and wing nut. Operation Adjust the angle pivot and vertical support assembly so that the hood is positioned close enough to the operation to be effective without interfering with it. Then, securely clamp a 4" dust hose between the hood assembly and your dust collection system. Parts Breakdown 5 REF PART # DESCRIPTION QTY REF PART # DESCRIPTION QTY 9 PT10117009 TOP VERTICAL SUPPORT 1 10 PLW04 LOCK WASHER 3/8 1 11 PT10117011 BASE 1 12 PT10117012 FOOT PAD M6-1 X 20 4 13 PW02 FLAT WASHER 3/8 1 14 PB18 HEX BOLT 3/8-16 X 1 1 15 PT10117015 HOOD MOUNTING TUBE 1 16 PWN02 WING NUT 1/4-20 1 1 PT10117001 DUST TUBE 1 2 PT10117002 DUST HOOD 1 3 PT10117003 KNOB 1/4-20 X 3/8 2 4 PT10117004 ANGLE PIVOT BRACKET 1 5 PB19 HEX BOLT 1/4-20 X 1/2 2 6 PT10117006 KNOB 3/8-16 X 1-1/2 1 7 PT10117007 BOTTOM VERTICAL SUPPORT 1 8 PT10117008 KNOB 5/16-18 X 3/4 1 COPYRIGHT © NOVEMBER, 2008 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLY INDUSTRIAL, INC. #TS11344 PRINTED IN TAIWAN...
Otros modelos de este manual:Los aficionados - Big-Mouth Dust Hood w/ Stand T10117 (156.24 kb)
Los aficionados - Big-Mouth Dust Hood w/ Stand T10117 (156.24 kb)