Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet. 2 If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT-IN jack on the rear of the DVD/VCR. If you do have a Cable Box (or Satellite Receiver), first connect the Cable TV (or Satellite) signal to the IN jack on the Cable Box/Satellite Receiver. Then, use an RF coaxial cable (like the one supplied) to connect the OUT jack of the Cable Box/Satellite Receiver to the ANT-IN jack on the DVD/VCR. 3 Connect the supplied black RF coaxial cable to the DVD/VCR’s ANT-OUT jack and to your TV’s ANTENNA IN jack. The TV’s ANTENNA IN jack could be labelled 75-ohm,TV IN, or RF IN. Check your TV manual for details. Plug the power cords of the DVD/VCR and the TV into an active power outlet. 5 Turn on the TV power. Set the TV to channel 3 or 4. (If you cannot use channel 3 at your TV, you can use channel 4 instead. However, you must set the DVD/VCR’s output channel to 4. See the accompanying DVD/VCR owner’s manual for details.) 6 Press the STANDBY-ON O button on the DVD/VCR or its remote to turn on the DVD/VCR. The first time you turn on the DVD/VCR, you should complete the VCR setup. See the other side of this Quick-Use Guide for details. MDV540VR/17 QUG_feb2 6.qx4 04.4.14 4:49 PM Page 2 -e Quick-Use Guide (contd) Setting Up the VCR the First Time Turn on the TV and set it to channel 3 or 4. 1 Press VCR,then press STANBDY-ON O to turn on the DVD/VCR. This display will appear. LANGUAGE SELECT B ENGLISH [ON] FRANCAIS ESPAÑOL PUSH B 3 4 AUTO SET UP Playing a Disc 1 With the TV and DVD/VCR on, press the DVD button to put the DVD/VCR in DVD mode. 2 3 4 Playable Discs The DVD Player of the DVD/VCR will play the following Discs. DVDs must have a Region Code of ALL regions or Region 1. Press ▲ or ▼ to select English, French, or Spanish as the language for VCR displays and menus. Then, press B. The AUTO SET UP message will appear. Press B to set up TV channels for the VCR. When setup is complete, the lowest TV channel will appear on the TV. Press OPEN/CLOSE A to open the disc tray. Put a Disc in the tray with the label facing up and the shiny side facing down. Press OPEN/CLOSE A again to close the tray. Playback may start automatically. If not, press PLAY B. If a DVD Disc menu appears, use the S, B, ▲, ▼,OK, or Number buttons to select features or start playback. Follow the instructions in the menu. To stop playing the Disc, press STOP ■. 2 DVDs must be recorded in either the NTSC or PAL color system.Your TV must also have the NTSC or PAL color system. MDV540VR / 8239 300 31732 OVMN04141A / H9660UD**** __ Printed in China Detailed playback features and additional functions are described in the accompanying owner’s manual....