Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
. You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. . You may not view a channel other than the one you are recording. . You may not program channels at the VCR. . You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 29.) Leave the Cable Box/DBS on for a timer recording. CH3 CH4 OUT IN ANT OUT IN 75ANT / CABLE TV’s ANTENNA IN Jack Cable Box/DBS VCR1 2 3 Cable Signal RF coaxial cable RF coaxial cable Connections 1 Connect a Cable signal to the IN Jack on the Cable Box/DBS. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box/DBS to the ANT(enna) IN Jack on the VCR. 3 Use a second RF coaxial cable to connect the OUT Jack on the VCR to the TV’s ANTENNA IN Jack. Recording/Viewing Any Channel 1 With the VCR on and in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to set the VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch to the same channel. 2 Set the TV to the same channel to which you set the VCR. 3 Select the channel you want to view/record at the Cable Box/DBS. CH3 CH4 OUT IN ANT IN OUT 75ANT / CABLE TV’s ANTENNA IN Jack Cable Box/DBS 1 2 3 Cable Signal RF coaxial cable RF coaxial cable TV’s ANTENNA IN Jack Cable Box/DBS 1 2 3 Cable Signal RF coaxial cable RF coaxial cable Hookups With a Cable Box/Direct Broadcast System (cont’d) 9 With this connection: l You may watch one channel while recording another. l You may not record scrambled channels. VCR Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. 3 Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV. Recording One Channel/Watching Another 1 Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to select the channel you want to record at the VCR. Start the recording. 2 Press the VCR/TV button once to put the VCR in TV position. (The VCR/TV light will disappear.) 3 Select the channel you want to watch at the Cable Box/DBS. • When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04). Helpful Hint 10 Hookups with a Stereo TV antenna or cable to ANT(enna) IN Jack Video Cable Stereo Audio Cable VIDEO (yellow) and AUDIO (red and white) OUT Jacks Audio and Video IN Jacks on TV 1 2 3 VR601BMG l Audio and Video cables are not supplied. VIDEO INOUT CH3 CH4 AUDIO OUT IN ANT antenna or cable to ANT(enna) IN Jack Video Cable VIDEO (yellow) and AUDIO (white) OUT Jacks 1 2 VR401BMG 3 Audio and Video IN Jacks on TV Audio Cable 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connectthe other end of the video cable to the VIDEO IN Jack on your TV. 3 VR601BMG: Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR, matching cable colors to the jack colors. Then, connect the other end of the audiocable to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors. VR401BMG: Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. (If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.) This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off). 4 Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details. 22 Front Panel PAUSE Button While recording, press to pause the recording. Press again to resume recording. Details are on page 25. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. Press again to resume playback. Details are on page 36. POWER Button Press to turn the VCR power on and off. VCR/TV Button Press to select VCR or TV position. l VCR Position Use to watch a tape, to watch a program while recording it, or to watch a TV pro- gram (changing channels at the VCR). When the VCR/TV light appears on the display panel, the VCR is in VCR position. l TV Po...
Otros modelos de este manual:Videocámaras - VR601BMG (154.21 kb)