Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
Refer any servicing to qualified service personnel. CONNECTION OF A REMOTE CONTROL UNIT (RCU) Connection to the RCU (WV-RC700A.WV-RC550) is made through the optional RCU cable AW-CA50A26. 1. Turn RCU power off before connecting cables. 2. Set the cable selection switch of the RCU to MULTI (in case of using the WV-RC700A) 3. Connect the 50-pin connector of the RCU cable to the l/F REMOTE Connector of the camera. 4. Turn RCU power on and the power indicator lamp will light. The camera can now be remote controlled by the RCU. Notes: • The maximum extension distance between the camera and WV-RC700A is 300 m. The maximum extension distance between the camera and VW-RC500 is 100 m. • Use the following options for cable extension. Studio Cable WV-CA26U 15(15 m/50 ft) WV-CA26U30 (30 m/100 ft) WV-CA26U100 (100 m/330 ft) Cable Joint Adaptor WV-CA26T26 -14* ■ CONNECTION OF A REMOTE CONTROL BOX (RCB) The RCB (WV-CB700A) and the camera must be connected with the optional RCB cable AW-CA50T10. 1. Turn RCB power off before connecting cables. 2. Connect the 50-pin connector of the RCB cable to l/F REMOTE connector of the camera. The 10-pin connector must be connected to the RCB. F fâ Eïo rag O 3. Turn RCB power on and the camera can be controlled remotely by the RCB. Notes: • The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommended that the signals from the monitor output be used for monitoring purposes only. • No gen-lock signal is available from the RCB. RCB Cable AW-CA50T10 (3 m) Video signal IN MONITOR OUT DC Power Cable AW-CA4T1 =