Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
When 9 screens are captured, the tape will stop. • If [PHOTO] or [SCENE] is selected: From the point at which the Button is pressed, 9 screens of pictures to which index signals are attached are captured in the playback direction. After 9 screens are captured, the tape will stop, but, if there are 8 or less pictures to be captured, the tape will stop at its end. Deleting All the Captured Multi Pictures ■ While displaying the multi-pictures that have been captured, press the [MULTI] Button. • If [MANUAL] has been selected, press [MULTI] Button after 9 screens are displayed: To Display the Multi-pictures again Press the [MULTI] Button for 1 second or longer. To Delete Multi-pictures one by one (When Pictures have been captured In Manual Mode): When the [MULTI] Button is pressed for 1 second or longer while the still pictures are displayed, the picture that was captured last is deleted. If you continue to press the Button, the pictures are deleted consecutively. • After still pictures are deleted one at a time, they cannot be displayed again. To Stop Capturing Pictures midway (When Pictures have been captured in Index Mode) Press the [■] Button. To Search the tape position of a desired picture among the playback pictures displayed on 9 screens 1 After displaying pictures in Multi Picture Mode, rotate the [PUSH] Dial to select the image whose tape position you want to search. • The selected picture blinks at the red frame. 2 Press the Remote controller’s Index Button [i-**] or [►►)] Q. • A still picture playback takes place at the selected picture. • For other notes, see page 52. 32 For assistance, please call: 1-800-211-PANA(7262) or send e -mail to : consumerproducts@panasonic.com £ I 1 . ■ * V. t , - 1 . ■V-. ; ■ HT r ( I I Playing Back on Your TV By connecting your Palmcorder with your TV, the recorded scenes can be viewed on your TV screen. • Before connecting them, turn off the power of both the Palmcorder and TV. 1 Connect the [AV IN/OUT] Jack of the Palmcorder to the Video and Audio Input Jacks of the TV. • Using the A/V Cable Q (supplied), make a connection with the TV. If the TV has an S-Video Jack, connect the S-VHS Cable (not supplied) 0, too. Making the Indications Appear on the TV screen Press the [OSD] Button 0 on the Remote Controller. • If you play back a Cassette recorded with copyright protection signals, the screen becomes blue or mosaic-like noise patterns. • If you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [IN/OUT), nothing will be shown on the TV screen except during playback. Audio Dubbing You can add music or narration to the recorded Cassette. • If you perform audio dubbing onto a tape that was recorded with [AUDIO REC] on the [RECORDING SETUP] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu set to [1 Gbit], the original sound is erased. (If you want to preserve the original sound, use the [12bit] Mode when recording.) • Audio Dubbing cannot be performed onto recordings made in LP Mode. (-♦19) 1 Set [VCR FUNCTIONS] » [AV IN/OUT SETUP] » [AV JACK] »[IN/OUT]. 2 And then select [A.DUB INPUT] » [MIC] or [AV IN]. • Set to [AV IN] when external sound equipment is used, or set to [MIC] when an external or built-in microphone is used. 3 Press the [►] Button, and then press the [I I] Button at the point where you want to start dubbing. 4 Press the [A.DUB] Button on the Remote Controller. • [A.DUBII] Indication appears. Q 5 To start Audio Dubbing, press the [I I] Button on the Remote Controller. • [A.DUB>] Indication appears. 0 To Stop Audio Dubbing Press the [II] Button on the Remote Controller. The Palmcorder is in the Still Playback Mode again. Playing Back the Sound Recorded with Audio Dubbing (For 12 bit Audio Recording) Set [VCR FUNCTIONS] »[PLAYBACK FUNCTIONS] » [AUDIO] » [ST2] or [MIX]. ST1: Play back only the original sound. ST2: Play back only the sound added by Audio Dubbing MIX: Play back both the original sound and the sound added by Audio Dubbing simultaneously. 33 Using a Memory Card ■ inserting a Memory Card Before inserting a Memory Card, be sure to turn the Palmcorder off. 1 Slide the [OPEN] Lever to the right and open the Card Slot Cover. 2 While holding the Memory Card with its cut corner facing right, insert it into the Card Slot. 3 Close the Card Slot Cover. ■ [ACCESS] Lamp While the Palmcorder is accessing the Card (reading, recording, playback, erasing, moving of images), the [ACCESS] Lamp Q lights up. • While the [ACCESS] Lamp is on, never attempt to open the Card Compartment, to pull out the Card, to turn off the Palmcorder power, or to switch the [TAPE/CARD] Selector. Such actions will damage the Card and cause the Palmcorder to malfunction. HFE. rCABP nnn 1 ICffiD Recording on the Memory Card Still pictures can be recorded on the Memory Card from the Palmcorder len as well as from scenes that have already been recorded on a cassette. The size of images that are recorded using this Palmcor...