Iniciar sesión:
Votos - 1, Puntuación media: 4 ( )

Manual de usuario Panasonic, modelo PVGS34

Fabricar: Panasonic
Tamaño del archivo: 5.5 mb
Nombre del archivo: PVGS34.PDF
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


This enables the printing information to be added to the pictures on the card so that it can be used on a system supporting DPOF. • For other notes concerning this item, see page 55. Protecting the Files on a Card ( Lock Setting) Precious files recorded on a Card can be locked to prevent accidental erasure. (Even if files are locked, the files will be deleted if the Card is formatted.) • Set to Picture Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. 1 Set [ BASIC] >> [ PROTECT] >> [YES]. 28 33 SETUP ENTER EXIT PROTECT 2 Move the Joystick Control [^, Ў, <, or >] 1 33 to select the file to be locked, and press the Joystick Control 33 . SETUP ENTER EXIT PROTECT • The selected file is locked and the [ ] Indication 1 appears. Repeat this procedure to lock 2 or more files. • Press the Joystick Control 33 again to cancel. Playback Mode 3 Repeat Step 2 and press the [MENU] Button 28 when the setup is completed. • The SD Memory Card has a write protection switch. (p. 55) • For other notes concerning this item, see page 55. Formatting a Card If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card. • When formatting the card all protected files (lock) are also deleted. • Set to Picture Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. 1 Set [ ADVANCE] >> [ CARD FORMAT] >> [YES]. 33 28 • A confirmation message appears, select [YES] and formatting will be carried out. CARD FORMAT NO YES DELETES ALL DATA SETUP ENTER EXIT • When the formatting is completed, the screen becomes white. • It may not be possible to use a Card formatted by this Camcorder on another unit. In this case, format the Card on the unit which will use the Card. Make sure that valuable pictures are stored on your PC before proceeding. • Normally, it is not necessary to format the card. If a message appears even though you insert and remove the card several times, format it. • If the SD Memory Card is formatted on other equipment, the time spent for recording may become longer. If the SD Memory Card is formatted on a PC, it cannot be used on the Camcorder. Format the SD Memory Card on the Camcorder, in this case. • The Camcorder supports SD Memory Cards formatted in FAT12 system and FAT16 system based on SD Memory Card Specifications. Playing Back on Your TV By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen. • Before connecting them, turn off the power of both the Camcorder and TV. 1 Insert a recorded tape into this Camcorder. 2 Connect the [AV OUT] Jack of the Camcorder and the Video and Audio Input Jacks of the TV. 1 [VIDEO IN] [AUDIO IN] A/V • Connect to the TV with the AV Cable 1 . • When plugging the pin plug of the AV cable into the [AV OUT] Jack, plug it in as far as it goes. 3 Turn on this Camcorder and set the Mode Dial 32 to the Tape Playback Mode. 4 Select the input channel on the TV. 5 Move the Joystick Control [^] 33 to select the [ ] to start playback. • The image and audio are output on the TV. 6 Move the Joystick Control [Ў] 33 to select the [ ] to stop playback. • If the image or audio from thisCamcorder is not output on the TV • Check that the plugs are inserted as far as they go. • Check the connected terminal. • Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) • For other notes concerning this item, see page 55. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: 37 Editing Mode Recording from a Tape onto a Card Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette. 1 Set the Mode Dial 32 to Tape Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. 32 33 23 Editing Mode 2 Insert a tape which already has recorded contents and a card. 3 Move the Joystick Control [^] 33 to start playback and set the Camcorder to Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button 23 . • For other notes concerning this item, see page 55. [One-Touch Navigation icon] A/V [VIDEO IN] [AUDIO IN] 1 Copying onto a DVD Recorder or a VCR ( Dubbing) Pictures recorded by the Camcorder can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder. • Place a recorded cassette in the Camcorder, and an unrecorded DVD-RAM or cassette in the DVD Recorder or VCR. 1 Connect the Camcorder and the Recorder. .. Connecting with the AV Cable • Connect the Camcorder and the Recorder by using the AV Cable 1 . .. Connecting with the optional DV cable (Only for equipment with a DV terminal) 2 Turn on the Camcorder and set to Tape Playback Mode. 3 Select the input channel on the TV set and recorder. 4 Move the Joystick Control [^] 33 to start playback. • The image and sound are reproduced. 5 Start r...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría