Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1 Set [TAPE RECORDING MENU] or [CARD RECORDING MENU] >> [INITIAL] >> [CLOCK SET] >> [YES]. (16) MENU STILL FADE ENTER CLOCK SET 1YEAR :2004 MONTH :JUL DAY :12 HOUR : 3PM MIN. :17 ;/.:SELECT &/%:SETUP !/MENU:EXIT 2 Press the [;/.] Button to select [YEAR], [MONTH], [DAY], [HOUR] or [MIN.] and press the [6/5] Button to set it to the desired value. .Year will cycle in the order shown below. 2000, 2001, ..., 2089, 2000, ... 3 Press the [MENU] Button (16) to finish setting the date and time. .The clock operation starts from [00] second. .If the built-in battery is weak, the [0] or [--] Indication flashes. In this case, charge the built-in battery. .The clock uses the 12-hour system. Internal Lithium Battery Recharge The internal lithium battery sustains the operation of the clock. When the [0] or [--] Indication flashes, the internal lithium battery is near exhaustion. 1 Connect the AC Adaptor to the Camcorder with the power turned off and then connect to the AC Jack. .After charging for 24 hours, the built-in lithium battery can power the clock for approximately 6 months. LP Mode A desired recording speed can be selected with [REC SPEED] on the [RECORDING] Sub-Menu. If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode. Although the image quality does not decrease with the LP Mode recording, mosaic-pattern noise may appear on a playback image, or some normal functions may be restricted. .The contents that are recorded in LP Mode are not completely compatible with other equipment. .Audio dubbing is not possible with LP Mode. (-53-) Audio Recording Mode The sound quality of the recorded sound can be selected with [AUDIO REC] on the [RECORDING] Sub-Menu. High sound-quality recording is possible with “16 bit 48 kHz 2 track” Mode. With the “12 bit 32 kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for Audio Dubbing. Recording Mode Recording on a Tape Recording Mode 1 Set the [OFF/ON] Switch (48) to [ON]. About Recording .The [POWER] Lamp (46) lights up. When recording pictures on a tape, set the Mode (46) Dial to Tape Recording Mode [ ]. When recording still pictures on a card, set the OFF POWER ON Mode Dial to Card Recording Mode [ ]. When recording with the (48) [AUTO/MANUAL/AE LOCK] Switch (31) set to [AUTO], the Camcorder automatically adjusts the 2 Set the Mode Dial (44) to Tape Recording focus and white balance. In some cases, they Mode. cannot be adjusted automatically and need to be adjusted manually. (-36-, -37-, -38-) PC SD AUTO (44) MANUAL (31) AE LOCK 3 Press the Recording Start/Stop Button (47). .Recording starts. .Before turning on the power, remove the .After [RECORD] is displayed, it changes to Lens Cap. If the Lens Cap is still attached [REC]. when the power is turned on, Automatic White Balance Adjustment (-36-) may not function correctly. .When the Recording Pause Mode continues for more than 5 minutes, the power is turned off automatically for tape protection and power (47) RECORD REC conservation. (If the AC Adaptor is used, the 4 Press the Recording Start/Stop Button (47) power is turned off only when the tape is again to pause the recording. inserted in Tape Recording Mode.) When the .The [PAUSE] Indication is displayed. tape is inserted in Tape Recording Mode and if the Recording Pause Mode continues for more than 5 minutes the power is turned off automatically. To resume recording from this condition, turn off, then turn on the power again. PAUSE PAUSE Recording “Simultaneous Motion/Still Record . Recording Lamp The Recording Lamp (34) lights up during recording and alerts those being recorded that recording is in progress. (34) .The Recording Lamp does not light up if the [REC LAMP] on the [INITIAL] Sub-Menu is set to [OFF]. Mode” .Even if the Mode Dial is set to Tape Recording Mode and the recording to a tape is in progress, you can also record a still picture on a card by pressing the [PHOTO SHOT] Button. . To Check the Recording By pressing the [S] Button (9) briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene. (9) REC BACK LIGHT .The [CHK] Indication is displayed. After checking, the Camcorder resumes the Recording Pause Mode. .For other notes concerning this item, see -74-. Recording Mode . Finding the End of Recording (Blank Search Function) The Blank Search Function aids you in locating the end of the recording on the Cassette quickly. 1 Set [TAPE RECORDING MENU] or [TAPE PLAYBACK MENU] >> [INITIAL] >> [BLANK SEARCH] >> [YES]. (16) MENU STILL FADE ENTER .The [BLANK] Indication appears during the Blank Search. .Approximately 1 second before the last recorded scene, the Camcorder switches to the Recording Pause Mode or the Still Playback Mode. .If there is no blank left on the Cassette, the Camcorder stops at the end of the tape. To Cancel Blank Search Before Completion Press the [.] Button. . To Add a Sound while Recording With the supplied ...