Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
.Using the MotionDV STUDIO for Windows, a variety of visual effects can be added and titles can be created. .You cannot record a video edited by the PC onto the tape in the Camcorder. .When 2 or more USB devices are connected to a personal computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. .When connected to the keyboard USB terminal, normal function may not be possible. With DV cable (optional) OS: Windows 2000/XP 1 Set the Mode Dial to Tape Recording Mode or Tape Playback Mode. 2 Connect the Camcorder to the personal computer with DV connection cable. 3 Select [start] >> [All Programs (Programs)] >> [Panasonic] >> [Quick Movie Magic 1.0E] or [MotionDV STUDIO 5.6E LE for DV] >> [Quick Movie Magic] or [MotionDV STUDIO LE for DV]. .You can record the video edited by the PC onto the tape in the Camcorder. LSQT0975 With a PC Using on Macintosh . Operating environment on iMovie 4/ iMovie HD OS: Mac OS X v 10.3 to v 10.4 CPU: PowerPC G3 (400 MHz or higher), G4, G5 Interface: DV (FireWire) .Supplied CD-ROM is available for Windows only. .iMovie/iMovie HD, included with any new Macintosh or sold with iLife. .For more information, please contact Apple Computer, Inc. at . Copying still pictures on PC 1 Connect the Camcorder to the personal computer via the supplied USB connection cable. 2 Double-click [NO_NAME] or [Untitled] displayed on the desktop. .Files are stored in [100CDPFP] folder in the [DCIM] folder. 3 Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the personal computer. To disconnect USB cable safely If USB cable is disconnected while the computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely. 1 Double click the icon in task tray. .Hardware disconnect dialog box appears. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [Matshita DVC USB Device] is selected and click [OK]. .You can safely disconnect the cable. LSQT0975 Note on the driver name displayed The driver name displayed will differ depending on your OS, operating environment and the mode of the Camcorder. .Make sure Camcorder’s Card Access Lamp is off and disconnect the cable. Also, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode. CAUTION: If you disconnect the USB cable while the Card Access Lamp is on, it may damage the Card data. If the above operation is not performed correctly, when data is copied from the personal computer to an SD Memory Card, the copied data may be damaged. When the following operations are performed, the same results will occur as when the USB cable is incorrectly removed (above). Therefore, it is imperative that the above operation is completed before proceeding. .When SD Memory Card is removed. .When Camcorder power is turned OFF. OFF ON .When Mode Dial is turned to change modes. PC When using on Macintosh Drag the [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB connection cable. If you no longer need software or driver (Uninstall) The screens may vary with the type of OS. 1 Select [start] (>> [Settings]) >> [Control Panel], select the software or the driver from [Add/Remove Programs] to uninstall. .Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS. With a PC Notes .Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. .Intel® and Pentium® are the registered trademarks or trademarks of the Intel Corporation. .Apple, Mac OS, iMovie/iMovie HD, FireWire are either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/ or other countries. .All other names, company names, product names, etc. in these instructions are the trademarks or registered trademarks of their respective corporations. .Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. .The names of the products you are using may differ from the names given in the text. Depending on the operating environment and other factors, the contents of the screens used in these instructions may not necessarily match what you will see on your screen. .Although the screens in these Operating Instructions are shown in English for the sake of example, other languages are supported as well. .These instructions do not cover the basic operations of the personal computer or define any terms. For this information, refer to the Operating Instructions which accompany your personal computer. .Do not disconnect USB connection cable while the status indicator of Camcorder is on. It may freeze the software or destroy the data in transfer. .We recommend using the AC adaptor as the power source for the Camcorder when connecting to the personal com...