Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
You can insert any one of the 12 included pre-recorded titles into your current video recording by following the steps outlined below. 1 Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 53). • Set POWER to CAMERA. Set DIGITAL SELECT to DIGITAL WIPE. ^CAUTION: . If you delete the following pre-recorded titles, they will not be restored. Panasonic ferner - - 4-1Л- Bon Voyage Press + (FF) or - (REW) to select still image to be used. Please see page 60 for further details. Start recording (page 23). Anniversary Congratulations Graduation Our Wedding ___ „ 62 Surprise! The Wedding For assistance, call 1-800-211 -PANA(7262) Vacation! PC Connection Digital PhotoShot Software A live or captured image can be transferred to your PC (Personal Computer). System Requirements for Adobe® PhotoDeluxe™ HE 3.0 (PV-L859 only) System Requirements for Digital PhotoShot_ • IBM PC/AT or compatible. • Intel® Pentium® Processor • Microsoft Windows®95 or Windows®98. • RAM: 16 MB or more • 2 MB of available hard-disk space. • 256 color monitor (full color recommended). • 3.5 inch 1.44 MB floppy disk drive (for installation). • RS-232C serial port (D-Sub 9-pin). An adaptor (D-Sub 9-pin male to a D-Sub female) is required for a D-Sub 25-pin. • Mouse or other pointing device. • Intel® Pentium® Processor • Microsoft Windows®95, Windows®98 or Windows NT®4.0. • 32 MB of RAM for Windows 95 and Windows 98. • 64 MB of RAM for Windows NT. • 140 MB of available hard-disk space. • Color monitor with thousands of colors. • CD-ROM drive or DVD-ROM drive. PC-Camcorder Connection Connect Camcorder PC jack to the serial port on your PC (Personal Computer) using the supplied PC connector cable. Refer to PC or Windows manual to identify which COM port to be used for connection. Before you begin... • Turn your PC off. • Set Camcorder POWER to OFF. Note: • Be sure to turn PC off before connection for properly image transfer. • After Camcorder and PC are connected by starting up the software included, video recording is not possible. RS-232C Serial Port (Default is СОМ1) (D-Sub 9-pin) PC Connector I cable (supplied) PC Connector 63 PC Connection Software Installation (Windows 95/98) Windows Update Type the name of a program, folder, document, or tniemet resource, and Windows wiS open k for you. Qperu jaAsetup.exe H OK Cancef growse.. Before you begin... • Your PC is in the power on mode. 1 2 Turn on PC (Personal Computer) and start up Windows. Insert Digital PhotoShot disk (Windows 95/98) into a floppy disk drive. Click on Start, then “Run...” Type in a:\setup.exe and click OK. • If your 3.5 inch floppy disk drive is not “A”, use appropriate letter. Follow instructions as they appear on PC screen until the installation is complete. • Setup window will disappear when the installation is complete. Note: * Please look for Windows NT version of driver software on our website at 64 For assistance, call 1-800-211-PANA(7262) PC Connection Running the Software (Windows 95/98 ) .Digital PhotoShot Window Help Open... Delete AU Com Setting.. Exit )sbDigilal PholoShol Fie Window Help COM SETUP f COM PORT T— —- ©C0M1 О com3 1 OK Q COM2 о COM4 ) Caned Before you begin... • Insert the CompactFlash Card (page 53). • Make Camcorder-PC connections (page 63). • Turn both units on. • Set Camcorder POWER to PHOTO. 1 2 Click on Start, then “Programs,’ then “Digital PhotoShot.” “Digital PhotoShot” is opened. Note: • If connection error message appears, confirm COM Port to be used for the connection with the Camcorder and correct COM Port selection as follows: a Select File b Select COM setting c Select the correct COM Port d Select OK COM PORT: COM1, COM2, COM3 or COM4 (COM1 or COM2 is usually used^ Refer to Help for information about application operation and other Error messages. rr BAUDRATE: laS Maximum Baudrate 115200 [Manual Setting” г?Maximum Baudrate^ Q115200 О 57600 019200 Cun ent bps OK Cancel 65 PC Connection Using Live Image Data You can capture the current Camcorder picture to your PC. .^•Digital PhnloShol I £1« Window üdp Before you begin... • Insert the CompactFlash Card (page 53). • Make Camcorder-PC connections (page 63). •.Turn both units on. • Set Camcorder POWER to PHOTO. 1 2 3 Repeat step 1 and 2 on page 65 to run the Software. Click on “Window,” then select “1 Live image Window." Click on “Preview,” then Click on “Capture.” • Repeat this step to decide on an image. • Captured image is transferred to your PC when “Capture’’ is clicked on. Click on “Window,” then select “Live photo Zoom In.” Click on “File,” then select “Save As.” • Captured image is stored to your PC. Note: • If, while transferring the image to your PC, the displayed picture appears abnormal, restart the PC application and turn Camcorder POWER off, and then back on. ...