Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Panasonic Tamaño del archivo: 2.61 mb Nombre del archivo: AJHDX900.PDF Idioma del manual:

Since it is possible to turn ON/OFF characters and markers independently for the respective outputs, it can be used fro video monitoring by video creators or recording on hard disks. On the HD SDI output, the embedded audio and the time code overlap. (Refer to page 31) O Down converter output provided as a standard configuration The video output can be switched between HD SDI signals and down converter output signals (analog composite signals). It is optimum for confirming shot images on the SD monitor. (Refer to page 31) O SD SDI output provided as a standard configuration The video output can be switched between HD SDI signals and down converter output signals (serial digital component signals). It is optimum for confirming shot images on the SD monitor. On the SD SDI output, the embedded audio overlap. (Refer to page 31) O Remote control connector By connecting the remote control unit (AJ-RC10G), which is available as an optional accessory, the unit can be controlled remotely. (Refer to page 89) O Confirmation of return video signals It is possible to confirm the return video signals (analog HD-Y signals) supplied to the GENLOCK IN connector of this unit in the viewfinder to confirm programs. (Only video signals from the same video system can be confirmed.) (Refer to page 121) O DC OUT connector The DC OUT connector of the unit produces 1.5 A of electrical current. By connecting an external switch to this connector, it is possible to control REC start/stop. Since a tally lamp can be used by connecting the LED to this connector, it is useful for shooting video when fixing the camera on a crane. (Refer to page 89) 9 1 1-4 Other features Chapter 1 General (continued) OSingle action shoulder pad slide function It is now possible to adjust the position where the unit is optimally balanced for operation using a single-touch action. This means that the operator can easily optimize the unit’s balance when the lens, battery, and other peripheral camera devices have been installed on the unit. (Refer to page 88) O Viewfinder connection From the viewfinder connector of the unit, 1080-59.94i or 1080-50i signals are output. Furthermore, signals are output for switching the frequencies of the connected viewfinder. Confirm images in multi formats by connecting the viewfinder (AJ-HVF21G), which is available as an optional accessory. (Refer to page 50) O User button On the side panel of the unit, three user buttons are available. For the respective buttons, it is possible to allocate functions that are used frequently. (Refer to page 62) 1-5 Dimensions drawing Unit: mm (inch) 129 (5-1/8) 329 (13) 62 (2-1/2) 102 (4-1/16) 204 (8-1/16) 271 (10-11/16) Chapter 1 General (continued) 1-6 System configuration Rain cover: SHAN-RC700 Soft carrying case: AJ-SC900 (not available in some area.) Hard carrying case: AJ-HT901G Tripod adapter: SHAN-TM700 V-mount type battery plate NP-1 type battery holder PROPAC14, TRIMPAC14, HYTRON50/100/120, DIONIC90/100/160 ENDURA7/10, BP-GL65/95 NP-L7 Battery Microphone kit: AJ-MC900G UniSlot wireless microphone receiver: Sennheiser EK3041 Microphone holder: AJ-MH800G Lens (Bayonet type): Fujinon, Canon External DC power supply M Cassette tapes: AJ-HP23EMG AJ-HP33EMG Cleaning tape: AJ-CL12MP Remote control unit: AJ-RC10G 2-inch electronic HD viewfinder: AJ-HVF21G (Mic holder provided) GPS unit: AJ-GPS900G (This unit is not available in European region.) Camera-Recorder: AJ-HDX900 SD memory card All of the devices and accessories other than the unit, which are shown in this system configuration, are optionally available. To use these devices and accessories, refer to the respective operation manuals. Chapter 2 Parts and their functions 2-1 Power supply and accessory mounting section 2 6 1 43 1 POWER switch This switch turns the power ON and OFF. 2 Battery mount This is for attaching the Anton/Bauer battery pack. 3 DC IN (external power input) socket (XLR, 4-pin) This unit is connected to an external DC power supply. 4 BREAKER switch If an excessively high current flows inside the unit due to some problem or other, the circuit breaker is tripped and the power is automatically turned off to protect the unit. Push this button in after an inspection has been conducted or repairs performed inside the unit by a qualified service person. If there are no problems, the power will come back on. 5 VF connector Viewfinder AJ-HVF21G (optional accessory) is connected here. Insert the connector for the viewfinder firmly until it clicks. 6 Shoulder belt fittings The shoulder belt is attached here. 7 Light shoe Use this to attach the video light, etc. 8 Lens mount (bayonet type) The lens is attached to this mount. 9 Lens lever This lever is tightened to secure the lens after it has been attached to the lens mount. ?7 6 5 9 8 : : Lens mount cap To remove the cap, push the lens lever 9 up. Keep the cap in place while the lens is not attached. ; Lens cable/microphone cable clamp This clamp is for anchoring the len...

Descargar ahora

Introduzca dos números de la imagen: