Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
B PED OFFSET: Setting of B pedestal offset of super gain. 25 Setting of Menu Items ! Maintenance menu < MATRIX > MATRIX TABLE :A MATRIX R-G :+00 MATRIX R-B :+00 MATRIX G-R :+00 MATRIX G-B :+00 MATRIX B-R :+00 MATRIX B-G :+00 < COLOR CORRECTION1 >. SAT PHASE. . R +00 +00. Mg +00 +00. B +00 +00. Cy +00 +00. G +00 +00. Y1 +00 +00. . < COLOR CORRECTION2 >. SAT PHASE. . R - Mg +00 +00. Mg - B +00 +00. B - Cy +00 +00. Cy - G +00 +00. G - Y1 +00 +00. Y1 - R +00 +00. . 8 Matrix menu Selection of table A, B or OFF. Adjustment of gain of each color. 9 Color correction 1 menu Adjustment of gain (saturation) and phase of each color. qZ Color correction 2 menu Adjustment of gain and phase of matrix. 26 Setting of Menu Items @ Setting menu SETTING. °° °° . 1.MODE. . 2.SHUTTER. 3.H.PHASE. . . MODE. °° °° . BLACK STRETCH . D5600K CABLE COMPE SUP GAIN CAM ID CAM ID POSI MATRIX TABLE COLOR CORRECTION STATUS . :OFF. :OFF. :0m. :OFF. :BAR. :0. :OFF. :OFF. :ON -Menu for various settings. 1 Camera mode setting menu BLACK STRETCH: Setting of the function of expanding low-brightness analog video level. It is set by ON/OFF. D5600K: It is able to make color temperature correction of about 5600 degrees of electric color temperature correcting file. It is set by ON/OFF. CABLE COMPE: Setting of video cable compensation. It is able to set 0/25/50m. SUP GAIN: It sets OFF/1/2/3 of MAX GAIN. CAM ID: Setting of camera ID display. It is set by OFF/BAR/ON. In BAR setting, CAM ID is displayed only in BAR mode. 27 Setting of Menu Items @ Setting menu MODE. °° °° . BLACK STRETCH . D5600K CABLE COMPE SUP GAIN CAM ID CAM ID POSI MATRIX TABLE COLOR CORRECTION STATUS SHUTTER. °° °° . SHUTTER MODE . SHUTTER SPEED SYNCHRO SCAN . H.PHASE. °° °° . H.PHASE-COARSE . H.PHASE-FINE . :OFF. :OFF. :0m. :OFF. :BAR. :0. :OFF. :OFF. :ON . :OFF. :1/100. :75.1. :09. :40 1 Camera mode setting menu (continued from previous page) CAM ID POSI: It sets the display position of camera ID. 0: top left, 1: top right, 2: down left, 3: down right. MATRIX TABLE: It sets A, B or OFF of Matrix table. COLOR CORRECTION: Setting of matrix ON/OFF. STATUS: It sets displaying/not displaying the status when AWB/ABB is executed. 2 Electronic shutter setting menu SHUTTER MODE: It selects the shutter operation. ON/SYNCHRO/OFF can be selected. ON Setting of normal discrete shutter speed. SYNCHRO Setting of synchro scan mode. SHUTTER SPEED: Setting of normal shutter speed. SYNCHRO SCAN: Setting of synchro scan mode. Shutter speeds of 60 Hz to 120 Hz can be continuously changed. 3 Horizontal phase adjustment menu for external reference signal H.PHASE-COARSE: It is able to set the horizontal phase in 15. step. H.PHASE-FINE: Setting of 1-step fine adjustment in the above phase adjustment. 28 Setting of Menu Items # Camera ID setting menu CAM ID°° °° . ID:AKHC900 . $ File managing and renewing menu -File operation menu H FILE MENU. °° : blinking display. FILE :USER1 SAVE FILE? :USER11 The file selected by FILE is loaded. SAVE : It can be selected from [PRESET/USER1 / USER2 /CURRENT]. When desired to return to the previous data after loading other file, select “CURRENT”. H FILE MENU° ° FILE :USER1 SAVE FILE? :USER1 SAVE : 29 Setting of Menu Items $ File managing and renewing menu H FILE MENU. ° . FILE . SAVE FILE? SAVE FILE MENU. °° . FILE SAVE FILE? SAVE IN USER1.OK?. YES. NO :USER1. :USER1. : :USER1. :USER1. -File operation menu (continued from previous page) 2 When saving the current data, two files (USER1 /USER2) can be saved. Select the file by “SAVE FILE?” Select “USER1” and move the cursor to SAVE and press the MENU key, then the item menu is displayed. 3 SAVE IN USER1. OK? “YES” and “NO” are displayed. Move the cursor from “NO” to “YES” and check that “YES” blinks. 4 When the menu key is pressed, “SAVE COMPLETE” appears, then “SAVE” of the file is completed. FILE MENU° ° FILE :USER1 SAVE FILE? :USER1 SAVE IN USER1.OK? SAVE COMPLETE 30 Outside Dimension Diagram ( ): mm LENS BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 /F 1/2q(12) 4-3/8q (110) 4-15/16q (125) 7/16q (10) 6-5/16q (160) 5/8q13/16q (15) (20) 31 Specifications & Accessories _ Specifications Supply voltage: DC 12V (supplied from D-SUB 15 pins) Power consumption: 22 W 1 indicates safety information. Image pickup device: 2/3q 2.2 million-pixel FIT CCDk3 System: GBR image pickup system Resolving optical system: F1.4 prism Optical filter: CC: clear, 4300K, 6300K, cross ND: 100%, 25%, 6.3%, 3.2% Lens mount: Bayonet type Output spec.: SMPTE 292M Sensitivity: F10, 2000Ix, 3200K, white reflection rate 89.9% S/N: 54 dB (Y signal 30 MHz) Horizontal frequency: 33.716 kHz (1125 lines/frame) Vertical frequency: 59.94 Hz (interlace) Ambient temp. for operation: 0°C to i40°C Ambient temp. for storage: –20°C to +60°C Weight: Approx. 4.07 lbs (1.85 kg) Dimensions: 4-3/8q (W)k5-13/16q (H) k7-1/8q (D) 110k147k180 mm Input/output signal Video output: Y, PB, PR, each 75 ohm output (signal band 30 MHz) SYNC input: SYNC input (GL input 3 value SYNC) Camer...