Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
AK-HDC930P Installing the board in a Multi-Format Camera O Remove the left and right side panels on the Multi-Format Camera (AK-HC930P). 2 Remove the blank panel (right side of camera), then feed the cable (supplied with the board) through the rectangular opening under the top panel and insert it into the connector on the opposite side. Rectangular opening CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. © Insert this board (down converter unit) into slot 6 of the camera's circuit board. o Insert the other end of the cable into the connector on the board itself. Printed in Japan VQT0G78 F0803Y0@ P...