Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
(The recording time is not incremented in the recording pause mode.) LAP 0 00 00 When the RESET button is pressed, the lap time display can be reset to “0:00:00". Page count display screen During 1-shot recording, each frame recorded counts as a page, and the total number of pages (frames) is displayed on this screen. (For details on 1-shot recording, see pages 48, 60.) 999999 When the RESET button is pressed, the page count display can be reset to “0." [Other notes] The item settings are entered when the PROGRAM switch is returned to the “OFF" position. TV monitor Menu Screen 2 (VTR mode settings 1) ((VTR MODE SELECT 1]) (HIGH DENSITY REC) MODE OFF (REC T -MODE) OFF (TAPE IN) STOP (TAPE END) STOP ALARM IN STOP (EJECT OPERATION) MODE EJECT The VTR mode settings are performed on ■ High-density recording mode selection Set the high-density recording mode. The “HDR” indication is displayed continuously for the time modes that support high-density recording. Using HDR mode results in recording intervals approximately one-third the size of those in the corresponding recording time mode. This means that approximately three times as many frames can be recorded. IHIGH DENSITY HÊC3 MODE ■ Recording time mode selection The recording time mode is set. When the recording is started, the unit is always placed in the time mode which was set. (See page 56) OFF: The time mode can be set as desired using the time mode button on the VTR’s sub panel. The mode can be changed even during recording. 2H: 2-hour mode (compatible with the standard mode of ordinary VTRs). 6H: 6-hour mode (compatible with the x 3 speed mode of ordinary VTRs). L12H: 12-hour mode (linear slow recording) L18H: 18-hour mode (linear slow recording) L24H: 24-hour mode (linear slow recording) 24H: 24-hour mode (supports HDR time lapse recording) 48H: 48-hour mode (supports HDR time lapse recording) 72H: 72-hour mode (supports HDR time lapse recording) 96H: 96-hour mode (supports HDR time lapse recording) 120H: 120-hour mode (supports HDR time lapse recording) 180H: 180-hour mode (supports HDR time lapse recording) 240H: 240-hour mode (supports HDR time lapse recording) 480H: 480-hour mode (supports HDR time lapse recording) 960H: 960-hour mode (HDR time lapse recording only) 000H: 1-shot recording mode (see pages 48, 60). [See Notes 1 and 2] ■ Sound cannnot be recorded in the time lapse recording or 1-shot recording modes. ■ Selection of operation when cassette is installed Select how the VTR is to operate when the cassette is installed. STOP: Stop mode REC: Automatic recording mode [see Note 3] REW-»REC: When a cassette tape is loaded, it is first rewound to its beginning and then recording is commenced automatically. (TAPE IN) 42 [Displaying the screens] PROGRAM T~1|MENUI -4 OFF 1 TIME 1 ADJ Set to ‘MENU.’ Press one of REV PLAY PLAY these buttons until the desired menu screen / or \ 1 appears. [Menu setting buttons] REV PLAY PLAY STOP pause/still 1 - 1 Г* 1 m пп - PAGE + REW/© ©/FF REV ADV FWD ADV 1 i L <«11 ] 1 !!► 1 ▼ SHIFT ► SET + PAGE {—) button: PAGE (+) button: SHIFT (▼) button: SHIFT (►) button: SET (-) button: SET (+) button: Page down Page up Move to item below Move to item on the right Change item (decrement numerical value) Change item (increment numerical value)_ Selection of operation at tape-end (TAPE END) MODE Select how the VTR is to operate at the ;ape-end. STOP: Stop mode BUZZER: Stop and the buzzer sounds. REW: Automatic rewinding mode [see Note 4] REPEAT: Repeat recording mode [see Note 5] Setting auto rewind function release when an alarm input is generated This setting selects whether the auto rewind function is to be released when there is an alarm input while recording is in progress. STOP: The auto rewind function is released. The VTR is set to the stop mode at the tape-end. CONTINUE: The auto rewind function is not released. (TAPE END) ALARM IN Selection of cassette EJECT button Select the operation which is to be performed when the EJECT button is pressed. EJECT: The cassette is ejected as soon as the button is pressed. REW-» EJECT: When the button is pressed, the tape is automatically rewound to its start before the cassette is ejected. NOTES [Note 1] The VTR’s time (hour) modes are based on the use of a 2-hour tape. If the cassette used has a different duration, the hour modes will be as follows: • 90-minute tape: 3/4 of selected time • 60-minute tape: 1/2 of selected time • 30-minute tape: 1/4 of selected time [Note 2] Linear slow recording With this kind of recording, the tape travel speed is reduced and the sound is recorded continuously. (Sound can be recorded.) Time lapse recording Long-duration recording is possible by recording while advancing the tape intermittently. (Sound cannot be recorded.) [Note 3] Automatic recording mode Recording is started automatically just by installing the cassette. [No...