Votos - 1, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Please note: If the hand strap is adjusted too tightly and you use excessive force to insert your hand, the hand strap hook of the camcorder may be damaged. 2 ADJUSTING THE LCD SCREEN The wide LCD screen on your camcorder offers high quality image viewing. 1. Open the LCD screen with your finger. • The screen opens up to 90°. 2. Rotate the LCD screen towards the lens. • You can rotate it up to 180° towards the lens and up to 90° backwards. To view recordings more conveniently, rotate the screen by 180° towards the lens, then fold it back to the body. Excessive rotation may damage the connective hinge between the screen and the camcorder. • When the LCD screen is rotated by 180°, the left and right sides of the subject are shown in reverse, which produces a horizontally flipped image. • Remove fingerprints or dust on the screen with a soft cloth. • To adjust the LCD brightness and colour, refer to the page 85. • Samsung’s super fine LCD technology activates about 99.99% pixels on the LCD screen. Although one or two black dots or bright dots (red, blue, white) could appear on the screen, this is not a malfunction and does not affect the recorded image. 1 11 Getting to know the camcorder To eject the battery USING THE BATTERY We recommend you purchase one or more additional batteries to allow continuous use of your camcorder. • Be sure to charge the battery before you start using your camcorder. • The battery may be charged a little at the time of purchase. Battery insertion/ejection To insert the battery 1. Insert the battery into the battery slot until it softly clicks. • Make sure that the SAMSUNG logo on the battery is facing you when the camcorder is placed as shown in the figure. 1. Gently push the Battery release switch in the direction shown in the diagram to eject the battery. 2. Push down, and then lift the battery out in the direction shown in the diagram. Use only Samsung-approved batteries. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion. Samsung is not responsible for problems caused by • • unapproved batteries. • Remove the battery from the camcorder when the camcorder is not in use. 1 11 Getting to know the camcorder 19 CHARGING THE BATTERY Charge the battery before using the camcorder. Use only the provided battery and AC adaptor. •• 1. Press the Power ( ) button to turn off the camcorder. .page 23 2. Insert the battery into the camcorder. .page 18 3. Open the connector cover of the unit. 4. Charge the battery using the AC power adaptor or USB cable. The CHG (charge) lamp lights up and charging starts. When the battery is fully charged, the charging (CHG) lamp turns green. .page 20 Using the AC power adaptor Connect the AC power adaptor to the camcorder properly, and then plug the AC power adaptor into the wall outlet. Using the USB cable Connect the USB cable to the camcorder properly, and then connect the other end to a USB port of a PC. • Charging the battery at low temperature may take longer or the battery may not charge fully (green indicator will not turn on). Please make sure that there are no foreign substances on the plug or in the socket when you connect the AC power supply to the camcorder. When using the AC power supply, place it close to the wall outlet. If you experience a malfunction while using the camcorder, separate the AC power supply immediately from the wall outlet. Do not use the AC power supply in a tight space, such as between furnishings. • • • • When recording indoors with a wall outlet available, it is convenient to use the AC power supply instead of the battery. We recommend you charge the battery in a place with an ambient temperature between 50.F and 86.F ( 10°C ~ 30°C). When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB. If the camcorder is turned on, the battery will still charge, but more charging time will be needed. We recommend you keep the camcorder turned off while it charges. • • • • Connecting the USB cable CARDCARD CARDCARD CARD CARD Connecting the AC power adaptor CARD CARD CARD CARD CARD Getting to know the camcorder CHECKING THE BATTERY STATE Battery level display The battery level display shows the amount of battery power remaining in the battery. To check the charging state You can check the charging state and remaining battery capacity. Battery Level Indicator State Message Fully charged (100%~75%) - 75%~50% - 50%~25% - 25%~5% - less than 5% - Exhausted (fl ickers): The device will soon turn off. Change the battery as soon as possible. - - (fl ickers): The device will be forced to turn off after 3 seconds. "Low battery" Above figures are based on a fully charged battery at normal temperature. Low ambient temperature may affect the use time. 0:00:00 [475Min]STBY 16M9999 The colour of the CHG lamp indicates the power or charging state. CARD Charging (CHG) lamp The colour of the charging indicator shows the charging state. C...
Otros modelos de este manual:Videocámaras - SMX-F500BP (11.76 mb)
Videocámaras - SMX-F500RP (11.76 mb)
Videocámaras - SMX-F500SP (11.76 mb)
Videocámaras - SMX-F501SP (11.76 mb)