Votos - 5, Puntuación media: 4.2 ( )

Fabricar: Samsung Tamaño del archivo: 6.15 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Cámaras - i70 (6.99 mb)

Videocámaras - I70 (6.32 mb)

Videocámaras - I70 (6.74 mb)

. Some movie clips that were compressed with a codec that is not compatible with the Digimax Master can’t play back in the Digimax Master. . Refer to the [Help] menu in Digimax Master for further information. .. 111S FAQ . Please check the following Case 1 The USB cable is not connected incorrect specification. . Use a USB cable with the correct Case 2 The camera is not recognized by your PC. may appear under [Unknown Devices] in Device . Install the camera driver correctly. Turn off the camera, USB cable, plug in the USB cable again, and then Case 3 Case 4 There is an unexpected error during file transfer . Turn the camera power off and on again. Transfer the file again. When using the USB hub. . There may be a problem in connecting the camera to the PC through a USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera directly to the PC. Case 5 Are other USB cables connected to the PC? . The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this instance, disconnect the other USB cable so that only the camera's USB cable is connected to the computer. .. 112S Case 6 When I open the Device . (Settings) . Control Panel . (Performance and Maintenance) . System . (Hardware) . Device Manager), there are .. Unknown DevicesS .. Other Devices .. entries with a yellow question or devices with an exclamation . Double-click on the entry with the question mark, and remove them (Click the right menu will display). Re-boot your computer and the camera. In Windows 98SE, remove the computer. And then connect the computer Case 7 In some security programs (Norton Anti Virus, V3, etc.), the may not recognise the camera as a removable disk. . Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to stop the program. Case 8 The camera is connected to the USB port located on the front of the computer. . When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. FAQ . When the movie clip . When the movie clip recorded the causes are mostly due . When codec for play back the movie . Install the codec as listed below. [Installing codec for Windows] 1. Installing the XviD codec 1) Insert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM drive:\click the XviD-1.1.2-01112006.exe file. . The XviD codec is distributed according to the GNU General and everyone can copy, distribute and change this codec. This applies to any program or other work which contains a notice placed copyright holder saying it may be distributed under the terms of this Public License. For more information, see the License documents (. 2. Install the Multi codec If the movie doesn't play back after installing the XviD codec, install a multi codec that supports MP4V. The caption may not be displayed after installing the multi codec in the Windows 98SE / ME. In this case, install the DivxG400 caption filter. [Installing codec for Mac OS] 1) Visit the following site for downloading the codec. (2) Check the version of Mac OS and click the [Download] button to download the 3ivx codec. 3) Run the downloaded be installed. . When the CPU is Intel Processor, . When the DirectX 9.0 or later . Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the Driver\DirectX 9.0] folder and click the DXESETUP.The DirectX will be installed. Visit the following DirectX.. If a PC (Windows 98SE) stops responding while the camera connected repeatedly . If a PC (Windows 98SE) is turned on for a long time and the onnected repeatedly, the PC may not recognise the camera. In this the PC. . If a PC connected with the camera stops responding while Windows is starting. . In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer. . If the movie clip can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer. . If you install only the Digimax Master, the problems mentioned above occasionally happen. - Close the Digimax Master program by clicking the Digimax Master icon on the Taskbar. - Install all the application programs included in the software CD. .. 113S Correct FCC notice FCC notice Correct Disposal Equipment) (Applicable in the European separate collection systems) literature, indicates that it should wa...

Descargar ahora

Introduzca dos números de la imagen: