Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
• During normal outdoor shooting, setting to AUTO may provide better results. 74 Displaying Date, Time and Camera Data (Data Code) The data code contains the date and time the recording was made. Cassette data codes can also display camera data (shutter speed and exposure settings). • ELURA20 MC only: Only the date and time appear in the data code when using a memory card. E DATA CODE MENU FOCUS/ DATA CODE During VCR mode, the data code can be displayed or hidden while the camera is in play, slow or still mode. Camera data may be displayed as “– – –” during fast forward, rewind, reverse Using the FullRange of Features playback, forward and reverse .2 playback. Press the DATA CODE button. When using a cassette, press it while the camcorder is in play, slow or still mode. • Press it once to display, once more to hide it. Selecting date/time Select whether you want the date, the time, or both to show up on your data code display ( 76). CARD PLAY VCR D/TIME SEL.•DATE & TIMEDISP.SET UP ( 35) To change the date and time combination, open the menu and select DISP.SET UP. Then select D/TIME SEL., set it to DATE, TIME or DATE & TIME and close the menu. 75 E Setting the data code You can also choose to display camera data (shutter speed and exposure settings) in cassette data codes. DATA CODE•••DATE/TIMEDISP.SET UP ( 35) VCR To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu. Possible data code combinations: DATA CODE D/TIME SEL. (cassette only) Date/Time Camera data Date/Time & Camera data Date JAN. 1,2001 F11 1/2000 F11 1/2000 JAN. 1,2001 Time 12:00:00 AM F11 1/2000 F11 1/2000 12:00:00 AM Date & Time 12:00 AM JAN. 1,2001 F11 1/2000 F11 1/2000 12:00 AM JAN. 1,2001 • The data code will read “– – –” in the following situations: – During playback of a blank section of tape. – If the tape was recorded before entering the date and time in the camera’s memory. – If the tape was recorded on a camera without a data code function. – If noise or tape damage prevents the data code from being read. • If a recording made on ELURA10/ELURA20 MC is played back on a different DV camcorder, the data code may not be displayed correctly. • The data code will appear in the display even if DISPLAYS ( 137) has been set to OFF through the menu. Using the FullRange of Features 76 Six-second auto date The 6-second auto date appears for 6 seconds to mark the changeover of a day if the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when you start playback and have the data code turned off. The 6-second auto date will adjust for any time zone changes you have indicated. 6SEC. DATE•••OFFDISP.SET UP ( 35) VCR To turn the 6-second auto date on, open the menu and select DISP.SET UP. Then select 6SEC. DATE, set it to ON and close the menu. • When 6SEC.DATE is turned on but DISPLAYS ( 137) is turned off, the 6second auto date will still appear for 6 seconds. E Using the FullRange of Features 77 Searching the Tape (Photo Search/Date Search) REW PLAY FF SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP A/VINSERT PAUSE SLOW .2 + /– / REMOTE OFF POWER VCR P.SCANMOVIE E This allows you to move quickly through still pictures recorded anywhere on a tape (photo search) or between different days or areas of recording (date search) on a tape. VCR 1. Press the SEARCH SELECT button to choose between photo/date search. • PHOTO SEARCH or DATE SEARCH is shown in the display for 4 seconds. 2. Press the -and + buttons to move backwards or forwards through the still pictures or between different days of recording. • Press once to move to the start of the previous/next still picture or day on the tape. • You can press more than once to move to the corresponding still picture or day (up to a maximum of 10 times), e.g. press the + button 5 times to move forward 5 still pictures or days. • PHOTO SEARCH/DATE SEARCH appears in the middle of the display alongside the -or + mark and number to search through. • Press 3 (stop) to stop mid-search. • If you begin a search very close to the start of a recorded still picture during photo search, the camera may skip straight past it. • When you have set the area for the World Clock, date search also looks for the change in date based on the adjusted time. • A date/area cannot be identified if the total recording time on that day/area was less than 1 minute. • Date search playback may start just before or after the beginning of the located section. • If the data code is not displayed correctly you will not be able to operate the date search correctly. Using the FullRange of Features 78 Returning to a Pre-Marked Position REW PLAY FF SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP A/VINSERT PAUSE SLOW .2 + /– / REMOTE OFF POWER VCR P.SCANMOVIE E Use the wireless controller to mark a point on a tape that you want to return to following playback. MOVIE P.SCAN VCR 1. Press the ZERO SET MEMORY button on the wireless controller during ...
Otros modelos de este manual:Videocámaras - Elura 10 (3.7 mb)