Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
3. Adjust ( ) the brightness level and press ( ) to save the changes, then close the menu. Changing the brightness of the LCD screen does not affect that of the viewfinder or the recordings. Turning the Remote Sensor Off MENU ( 36) SYSTEM SETUP WL.REMOTE ON 1. Open the FUNC. menu, select ( ) the icon and press ( ). 2. Select ( ) the [SYSTEM SETUP] menu and press ( ). Then, select ( ) the [WL.REMOTE] option and press ( ). 3. Set it to [OFF] and press ( ) to save the changes, then close the menu. “ ” appears. 67 Turning Off the Image Stabilizer The image stabilizer compensates for camcorder shake even at full telephoto. It tries to compensate for horizontal movements; therefore, you may decide to turn it off when you mount the camcorder on a tripod. MENU ( 36) CAMERA SETUP IMG STAB ON 1. Open the FUNC. menu, select ( ) the icon and press ( ). 2. Select ( ) the [CAMERA SETUP] menu and press ( ). Then, select ( ) the [IMG STAB] option and press ( ). 3. Set it to [OFF] and press ( ) to save the changes, then close the menu. “ ” disappears. • The image stabilizer cannot be turned off when the program selector is set to . • The image stabilizer is designed to compensate a normal degree of camcorder shake. • The image stabilizer might not be as effective when using the Night recording program. Changing the Display of the Start-Up Image You can set whether the Canon logo will be displayed or not when you turn on the camcorder. MENU ( 36) SYSTEM SETUP START-UP IMG ON To turn off the start-up image: 1. Open the FUNC. menu, select ( ) the icon and press ( ). 2. Select ( ) the [SYSTEM SETUP] menu and press ( ). Then, select ( ) the [START-UP IMG] option and press ( ). 3. Set it to [OFF] and press ( ) to save the changes, then close the menu. Demonstration Mode The demonstration mode displays the camcorder’s main features. It starts automatically when you leave the camcorder turned on (using the power adapter) without loading a recording media for more than 5 minutes. However, you can set the camcorder not to start the demonstration mode. E MENU ( 36) DISPLAY SETUP/ DEMO MODE ON To deactivate the demonstration mode: 1. Open the FUNC. menu, select ( ) the icon and press ( ). 2. Select ( ) the [DISPLAY SETUP/ ] menu and press ( ). Then, select ( ) the [DEMO MODE] option and press ( ). 3. Set it to [OFF] and press ( ) to save the changes, then close the menu. To cancel the demo mode once it has begun, press any button, turn off the camcorder or load a recording media. Advanced Functions Other Functions 69 Recording to a VCR or Digital Video Device You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. Connecting the Devices Connecting a VCR See Playing Back on a TV Screen( 32). Connecting a Digital Video Device Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable. Refer also to the instruction manual of the digital video device. Signal flow DV cable (optional) Recording 1. Set the camcorder to mode and load a recorded cassette. 2. Connected device: Load a blank cassette and set the device to record pause mode. 3. Locate the scene you wish to copy and pause playback shortly before the scene. 4. Play back the tape. 5. Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete. 6. Stop playback. E • We recommend powering the camcorder from a household power source. • When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. • When connecting a digital video device: -If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. -Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal. If operation does not work, use the AV terminal. Editing 71 Recording from Analog Video Devices (VCR, TV or Camcorder) You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder. 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen( 32). 2. Set the camcorder to mode and load a blank cassette. 3. Connected device: Load the recorded cassette. 4. Open the FUNC. menu, select ( ) the record pause icon and press ( ). 5. Select ( ) [EXECUTE] and press ( ). In record pause and during recording, you can check the picture on the screen. 6. Connected device: Play back the tape. 7. If the joystick guide does not appear on screen, press ( ) to display it. 8. Push the joystick ( ) towards / when the scene you wish to record appears. • Recording starts. • Push the joystick ( ) towards / again to pause/resume the recording. 9. Push the joystick ( ) towards to stop recording. 10.Connected device: Stop playback. • When connecting to a TV/Video with SCART terminal, use a SCART adapter with input capability (commercially available). The suppl...
Otros modelos de este manual:Videocámaras - MV960 (4.39 mb)
Videocámaras - MV950 (4.39 mb)
Videocámaras - MV930 (4.39 mb)