Open the menu and select [CARD OPERATIONS]. 2. SELECT [ TRANS.ORDERS ALL ERASE]. “ERASE ALL TRANSFER ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear. 4. Close the menu. 123 Screen Displays Hiding the Displays on the LCD Screen You can hide the displays on the LCD screen to have a clear screen for playback. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY MENU ( 36) DISPLAY SETUP/ DISPLAYS•••••ON Open the menu and select [DISPLAY SETUP/ ]. Select [DISPLAYS], set it to [OFF ] and close the menu. • Warning messages still appear, and the data code appears if turned on. • The displays appear while a playback image is magnified or a digital effect is activated. • Tape operation displays appear for 2 seconds. • Displays cannot be hidden on the index screen. Hiding/Showing the Displays on the TV Screen When you connect a TV for recording, you can select to hide the camcorder displays on the TV screen. For playback, you can show the camcorder displays on the TV screen. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY MENU ( 36) DISPLAY SETUP/ TV SCREEN••••ON Open the menu and select [DISPLAY SETUP/ ]. Select [TV SCREEN], set it to [OFF] and close the menu. The displays disappear from the TV screen. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY MENU ( 36) DISPLAY SETUP/ TV SCREEN••••OFF Open the menu and select [DISPLAY SETUP/ ]. Select [TV SCREEN], set it to [ON] and close the menu. The displays appear on the TV screen. Screen Displays during Recording/Playback CAMERA Mode (see also 25) E Digital effects ( 59) Date and time ( 20) AF/AE locked during still image recording ( 90) Skin detail ( 48) Zoom ( 27) Self-timer ( 56) Image stabilizer ( 74) Self-timer countdown ( 56) Recording mode ( 57) Tape operation Program AE ( 44) Condensation warning ( 131) AE Shift ( 49) Wind screen ( 58) Shutter speed ( 54) Audio mode ( 58) Manual focus ( 50) Widescreen mode ( 64) White balance ( 52) Remaining card capacity for still images Card mix ( 104) ( 91) PLAY (VCR) Mode REC PAUSE STOP EJECT FF REW / : Fast forward playback/ rewind playback ( x2 / x2: x2 playback ( x1 / x1: x1 playback ( / : Slow playback ( / : Frame advance playback/ frame reverse playback 31) 31) 31) 31) ( 31) 12 bit audio ( 84) End search ( 68) / Date search ( 70) / Audio dubbing ( 82) Data code ( 66) Volume level of speaker ( 32) ( 31) / : Date search ( 70) RTN / RTN: Zero set memory ( 69) / : Playback pause / : Audio dubbing ( 82) AdditionalInformation 125 CARD CAMERA Mode (see also 96) Focusing frame ( 97) Stitch assist ( 98) Camcorder shake warning ( 55) CARD PLAY Mode Slide show ( 101) Data code ( 66) Lap time Length of the movie Current image/total images File number ( 89) Protect mark ( 102) List of Messages E Message Explanation SET THE TIME ZONE, DATE AND TIME You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. 20 CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 11 THE TAPE IS SET FOR ERASURE PREVENTION Cassette is protected. Replace the cassette or change the position of the protect switch. 134 REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Unload and reload the cassette. 14 CHECK THE INPUT DV cable or USB cable is not connected, or the connected digital device is turned off. 80 CONDENSATION HAS BEEN DETECTED Condensation has been detected in the camcorder. 131 TAPE END Tape reached the end. Rewind the tape or replace the cassette. – CHECK THE CASSETTE [REC MODE] You attempted to perform audio dubbing on a tape recorded in a mode other than the SP mode. 82 CHECK THE CASSETTE [AUDIO MODE] You attempted to perform audio dubbing on a tape recorded in 16bit or 12-bit 4-channel sound. 82 CHECK THE CASSETTE [BLANK] You attempted to perform audio dubbing on a tape with a blank section. 82 CHECK THE CASSETTE [WRONG FORMAT] You attempted to perform audio dubbing on a tape recorded in HD format. – WRONG FORMAT PLAYBACK NOT POSSIBLE You attempted to play back a tape recorded in HD format. – COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED You attempted to play back a copyright protected tape. 79 COPYRIGHT PROTECTED DUBBING RESTRICTED You attempted to dub a copyright protected tape. May also appear when an anomalous signal is received during analog line-in recording, or during analog-digital conversion of a copyright protected tape. 79 Memory Card Related Messages Message Explanation NO CARD Memory card not is inserted into the camcorder. 86 THE CARD IS SET FOR ERASURE PREVENTION SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. 86 NO IMAGES No images are recorded on the memory card. – CARD ERROR A memory card error occurred. The camcorder cannot record or play back the image. The error may be temporary. If the message disappears after 4 seconds and “ ” flashes red, turn the camcorder off, remove the card and reinsert the card. If “ ” changes to green, you ...
