Votos - 3, Puntuación media: 3
(
)
)
|
Fotos y especificaciones Canon MV530i |
Resumen del manual
Press the DATA CODE button. When using a cassette, press it while the camcorder is in play, slow or still mode. • Press it once to display, once more to hide it. Selecting date/time Select whether you want the date, the time, or both to show up on your data code display. + , + PLAY (VCR)CARDPLAY (VCR)TAPE D/TIME SEL.•DATE & TIMEDISP.SET UP ( 40) To change the date and time combination, open the menu and select DISP.SET UP. Then select D/TIME SEL, set it to DATE, TIME or DATE & TIME and close the menu. 82 Setting the data code E You can also choose to display camcorder data (shutter speed and exposure settings) in cassette data codes. + PLAY (VCR)TAPE DATA CODE•••DATE/TIMEDISP.SET UP ( 40) To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu. Possible data code combinations for cassettes: DATA CODE (cassette only)D/TIME SEL. Date/Time Camera data Date/Time & Camera data Date 1.JAN.2002 F11 1/250 F11 1/250 1.JAN.2002 Time 12:00:00 AM F11 1/250 F11 1/250 12:00:00 AM Date & Time 12:00 AM 1.JAN.2002 F11 1/250F11 1/250 12:00 AM 1.JAN.2002 Using the FullRange of Features Notes: • The data code will read “– – –” in the following situations: – During playback of a blank section of tape. – If the tape was recorded before entering the date and time in the camcorder’s memory. – If the tape was recorded on a camcorder without a data code function. – If noise or tape damage prevents the data code from being read. • If a recording made on MV550i/MV530i is played back on a different DV camcorder, the data code may not be displayed correctly. • The data code will appear in the display even if DISPLAYS ( 150) has been set to OFF through the menu. 83 Six-second auto date E The 6-second auto date appears for 6 seconds to mark the changeover of a day if the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when you start playback and have the data code turned off. The 6-second auto date will adjust for any time zone changes you have indicated. + PLAY (VCR)TAPE 6SEC. DATE•••OFFDISP.SET UP ( 40) To turn the 6-second auto date on, open the menu and select DISP.SET UP. Then select 6SEC. DATE, set it to ON and close the menu. Note: • When 6SEC.DATE is turned on but DISPLAYS ( 150) is turned off, the six- second auto date will still appear for 6 seconds. Using the FullRange of Features 84 E Searching the Tape (Photo Search/Date Search) REW PLAY FF REMOTE SET SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT PAUSE SLOW .2 + /– / POWER CAMERA PLAY(VCR) OFF REW PLAY FF REMOTE SET SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT PAUSE SLOW .2 + /– / POWER CAMERA PLAY(VCR) OFF This allows you to move quickly through still pictures recorded anywhere on a tape (photo search) or between different days or areas of recording (date search) on a tape. + PLAY (VCR)TAPE 1. Press the SEARCH SELECT button to choose between photo/date search. • PHOTO SEARCH or DATE SEARCH is shown in the display for 4 seconds. 2. Press the -and + buttons to move backwards or forwards through the still pictures or between different days of recording. • Press once to move to the start of the previous/next still picture or day on the tape. • You can press more than once to move to the corresponding still picture or day (up to a maximum of 10 times), e.g. press the + button 5 times to move forward 5 still pictures or days. • PHOTO SEARCH/DATE SEARCH appears in the middle of the display alongside the -or + mark and number to search through. You can change direction easily by pressing the button for the opposite direction. Notes: • Press 3 (stop) to stop mid-search. • If you begin a search very close to the start of a recorded still picture during photo search, the camcorder may skip straight past it. • When you have set the area for the World Clock, date search also looks for the change in date based on the adjusted time. • A date/area cannot be identified if the total recording time on that day/area was less than 1 minute. • Date search playback may start just before or after the beginning of the located section. • If the data code is not displayed correctly you will not be able to operate the date search correctly. Using the FullRange of Features 85 E Returning to a Pre-Marked Position REW PLAY FF SEARCH SELECT STOP PAUSE SLOW .2 + /– / REMOTE SET ZERO SET MEMORY AUDIO DUB. AV INSERT POWER CAMERACAMERA PLAY(VCR) OFF REW PLAY FF SEARCH SELECT STOP PAUSE SLOW .2 + /– / REMOTE SET ZERO SET MEMORY AUDIO DUB. AV INSERT POWER CAMERACAMERA PLAY(VCR) OFF + , + PLA Y (VCR)T APECAMERAT APE Use the wireless controller to mark a point on a tape that you want to return to following playback. 1. Press the ZERO SET MEMORY button on the wireless controller during playback at a point you want to return to later. • The time code is replaced by a tape counter that is set to zero with the A indication. • Press the ZERO SET MEMORY button once more to cancel the zero set m...
Otros modelos de este manual:Videocámaras - MV550i (5.41 mb)