Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Canon MV500 |
Resumen del manual
•“16 bit”is shown in the display for approximately 4 seconds. Notes: •For details on adding new sound, see p. 88. •For details of playing back a tape that has new sound on stereo 2, see p. 93. For MV500i • When you record to the MV500i from a camcorder with DV terminal outputs, the audio mode becomes automatically set to 12 bit. • In PLAY (VCR) mode, the audio mode takes effect when doing analog line-in recording or AV insert. When you do DV in recording, the setting automatically changes to that of the digital device connected to the camcorder. Using the FullRange of Features External microphone For greater creative control over audio recording, you can connect an external microphone to the camcorder via the MIC terminal. When using the MIC terminal, use a microphone with a built-in power supply (condenser microphone). It is possible to connect almost any stereo microphone with a plug diameter of 3.5 mm (1/8 in), however, their audio levels will be different from that of the built-in microphone. 61 Notes: E • When using an external microphone, use a microphone cable not longer than 3 meters to avoid electromagnetic inerference. • Be careful when using long microphones as they may extend into the frame. Wind screen The camcorder has an automatic wind screen to prevent wind noise from interfering with the sound track. Make sure it’s off when you want the microphone to be as sensitive as possible. Use the wind screen when recording in windy places such as the beach or near buildings. Using the FullRange of FeaturesTo turn it on, open the menu and select VCR SET UP. Then select WIND SCREEN, set it to ON and close the menu. • WS Ois shown in the display when you turn the wind screen on. WIND SCREEN••OFFVCR SET UP ( 39) , PLAY (VCR)CAMERA Notes: • The wind screen can be used for audio dubbing with the built-in microphone in PLAY (VCR) mode as well as recording (when AUDIO DUB. is set to MIC. IN in VCR SET UP submenu). • The wind screen does not operate when an external microphone is connected to the MIC terminal. 62 E Setting the Self-Timer PHOTO START /STOP PHOTO MENUSELF TIMER DATACODEDATA CODE POWER CAMERA PLAY(VCR) OFF 2, 3 21 For stills For movies PHOTO START /STOP PHOTO MENUSELF TIMER DATACODEDATA CODE POWER CAMERA PLAY(VCR) OFF 2, 3 21 For stills For movies This is useful when you want to include yourself in the picture when recording movies or still photographs. CAMERA 1. Press the self-timer button on the body of the camcorder or the SELF TIMER button on the wireless controller. • SELF-T appears in the display. • To have the subject monitor recording, rotate the LCD panel 180° ( 27). For movies 2. Press the start/stop button. • The camcorder starts to record after a 10-second countdown period (or after 2 seconds when you use the wireless controller). The time remaining counts down in the display (e.g. “5 SEC”). • SELF-T disappears from the display when recording begins. 3. Press the start/stop button to end recording. For stills 2. Press a PHOTO button on the camcorder body or the wireless controller. • The camcorder automatically adjusts the focus 2 seconds before the countdown is complete. The F mark flashes white then turns green after the focus and exposure are set. If you are using the wireless controller, the F mark starts flashing immediately after you press the PHOTO button. 63 Using the FullRange of Features E • The camcorder takes the picture for approximately 6 seconds. • If you’re in CAMERA mode, the camcorder returns to record pause mode after recording. Notes: • To cancel the self-timer before the countdown has begun, press the SELF TIMER button. • To cancel the self-timer once the countdown has begun, press the SELF TIMER button. Using the FullRange of Features 64 Ajusting AE Shift By controlling the level of the automatic exposure (AE) function, you can lighten or darken the image slightly. This allows you to compensate for backlit, overexposed scenes. E PP AE SHIFT CAMERA Make sure the program selector is set to Q . 1. Press the selector dial in and select any recording program other than Spotlight, Sand & Snow or Night from the program menu. 2. Press the AE SHIFT button. • eAE appears light blue. 3. Turn the selector dial to choose your desired level. • Levels are from –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75). • The higher the setting, the brighter the image. Notes: • You cannot adjust the exposure without the e mark before AE in the display. Push the AE SHIFT button so that e appears before AE. Then you can adjust the exposure manually. • You cannot adjust the AE Shift when the camcorder is set to [ (Easy Recording), the Spotlight, the Sand & Snow or Night recording program. Using the FullRange of Features 65 Setting the Shutter Speed E Set the shutter speed manually to take stable shots of quickly moving subjects. SHUTTER•••••AUTOCAM.SET UP ( 39) CAMERA Using the FullRange of Features 1. Make sure the camcorder is set to the Q (program AE) mode. 2. Press the selector d...
Otros modelos de este manual:Videocámaras - MV500i (3.33 mb)