Votos - 2, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Replace the memory card with one rated Speed Class 2 or higher. NAMING ERROR -The folder and file numbers have reached their maximum value. Set [IMG NUMBERS] to [RESET] ( 78) and erase all the images on the memory card or initialize it. NEED TO RECOVER FILES FROM THE CARD. CHANGE THE POSITION OF THE CARD'S LOCK SWITCH. -This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. NO CARD -There is no memory card in the camcorder. NO IMAGES -There are no still images to play back. NO SCENES -There are no scenes recorded in the memory selected. NOT AVAILABLE IN MODE -You pressed a button that cannot be used in mode (while the button's blue light is on). Press the button to set the camcorder to flexible recording mode. PROCESS CANCELED -The process was canceled following user intervention. REACHED THE MAXIMUM NUMBER OF SCENES -The maximum number of scenes has been reached. Delete some scenes ( 38). -Scene could not be added to the playlist ( 48). The playlist cannot contain more than 99 scenes. Delete some scenes ( 38). READING THE BUILT-IN MEMORY -Reading data from the built-in memory. / READING THE CARD -Reading data from the memory card. SOME SCENES COULD NOT BE DELETED -Movies that were protected/edited with other devices cannot be deleted. TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE -The camcorder is updating the memory. Do not disconnect the compact power adapter or remove the battery pack. THE CAMCORDER IS SET TO STILL IMAGE MODE -You pressed Start/Stop while recording still images ( mode). THE CARD IS SET FOR ERASURE PREVENTION -The LOCK switch on the SD or SDHC memory card is set to prevent accidental erasure. Change the position of the LOCK switch. THE MEMORY CARD COVER IS OPEN -After inserting a memory card, close the memory card slot cover ( 26). TOO MANY STILL IMAGES DISCONNECT USB CABLE -Disconnect the USB cable and decrease the number of still images on the memory card to fewer than 1,800. If a dialog appeared on the computer screen, close it and then reconnect the USB cable. TRANSFER ORDER ERROR -You attempted to set more than 998 transfer orders. Reduce the number of still images marked with transfer orders. UNABLE TO RECOGNIZE THE DATA -You transferred data to the camcorder recorded in a different television system (NTSC). -A memory card with data recorded in a different television system (NTSC) was inserted into the camcorder. UNABLE TO RECOVER DATA -Could not recover a corrupted file. WHILE THE CAMCORDER IS CONNECTED TO A PC DO NOT DISCONNECT THE USB CABLE OR POWER SOURCE CANNOT TURN OFF POWER OR CHANGE MODES -When the camcorder is in mode and is connected to the computer with a USB cable, the camcorder cannot be operated. Disconnecting the USB cable or...
Otros modelos de este manual:Videocámaras - DIGITAL VIDEO CAMCORDER FS10 (3.35 mb)
Videocámaras - DIGITAL VIDEO CAMCORDER FS100 (3.35 mb)
Videocámaras - DIGITAL VIDEO CAMCORDER FS11 (3.35 mb)
Videocámaras - FS11 (3.35 mb)