Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Canon EOS C100 |
Resumen del manual
CH1/CH2 AUDIO IN switches Recording Audio Adjusting the Audio Level for the MIC Terminal You can adjust the audio recording level of a microphone attached to the MIC terminal to auto or manual. The way to adjust the audio level depends on whether the handle unit is attached to the camcorder. CH1 dial When the Handle Unit is Attached With the handle unit attached, the audio level adjustment is done using the audio controls on the handle unit. 1 Select the audio level adjustment mode with the CH1 audio level switch. • Automatic audio level adjustment: Set the CH1 audio level switch to A. You do not need to perform the rest of the procedure. switch Manual audio level adjustment: Set the CH1 audio level switch to M. Continue the procedure to set the microphone's audio recording level. 2 Turn the CH1 dial to adjust the audio level. • For reference, 0 corresponds to -G, 5 corresponds to 0 dB, and 10 corresponds to +18 dB. • As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right of the 18 dB mark (one mark right of the 20 dB mark) only occasionally. • Closing the protective cover will prevent the audio controls from being changed inadvertently. When the Handle Unit is Not Attached You can use an external microphone connected to the MIC terminal without attaching the handle unit. In such case, adjust the microphone's audio recording level using the menu. 1 Open the [MIC Mode] submenu. [. Audio Setup] [. Audio Setup] > [Audio Input] > [MIC Mode] 2 Select [Automatic] or [Manual] and then press the joystick. [Audio Input] • If you selected [Automatic], you do not need to perform the rest of the procedure. If you selected [Manual], continue the procedure to set the [MIC Mode] microphone’s audio recording level. 3 Open the [MIC Level] screen. [Automatic] [. Audio Setup] > [Audio Input] > [MIC Level] 4 Push the joystick up/down to set the audio recording level and then press the joystick. [. Audio Setup] • For reference, 0 corresponds to -G, 50 corresponds to 0 dB, and 99 corresponds to +18 dB. [Audio Input] • As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right of the 18 dB mark (one mark [MIC Level] right of the 20 dB mark) only occasionally. CH1 audio level [50] NOTES • When adjusting the audio level manually, you can activate the audio peak limiter with the [. Audio Setup] > [Audio Input] > [Limiter] setting. When activated, the audio peak limiter will limit the amplitude of audio input signals when they exceed -6 dBFS. • We recommend using headphones when adjusting the audio level. If the input level is too high, audio may become distorted even if the audio level indicator shows an appropriate level. • If you set an assignable button to [Audio Level] (A 85), you can press the button to turn the onscreen audio level indicator on and off. Recording Audio Configuring the Built-in Microphone’s Low-Cut Filter 1 Open the [Int. Mic Low Cut] submenu. [. Audio Setup] > [Audio Input] > [Int. Mic Low Cut] 2 Select the desired option and then press the joystick. Options [Off]: For recording audio under usual conditions. [LC1]: For recording mainly people’s voices. [LC2]: For reducing the background sound of wind when recording outdoors in windy surroundings (for example, on a beach or close to buildings). Note that when you use this setting some low-frequency sounds may be suppressed along with the sound of wind. Selecting the Built-in Microphone’s Sensitivity 1 Open the [Int. Mic Sensitivity] submenu. [. Audio Setup] > [Audio Input] > [Int. Mic Sensitivity] 2 Select the desired option and then press the joystick. Options [Normal]: For recording audio under usual conditions. [High]: For recording audio at a higher volume (+6 dB). Activating the Microphone Attenuator If the audio level is too high and the sound sounds distorted when recording with the built-in microphone or an external microphone connected to the MIC terminal, activate the microphone attenuator (builtin microphone: 12 dB, external microphone (MIC terminal): 20 dB). 1 Open the [MIC/Int. Mic Att.] submenu. [. Audio Setup] > [Audio Input] > [MIC/Int. Mic Att.] 2 Select [On] and then press the joystick. [. Audio Setup] [Audio Input] [Int. Mic Low Cut] [Off] [. Audio Setup] [Audio Input] [Int. Mic Sensitivity] [Normal] [. Audio Setup] [Audio Input] [MIC/Int. Mic Att.] [Off] Recording Audio Using Audio Input from the XLR Terminals Using the XLR terminals CH1 and CH2, you can record audio independently to the two audio channels from a microphone or analog audio input source. Switching Between Microphone and Line Input 1 Set the AUDIO IN switch of the desired channel to EXT. 2 Set the XLR terminal switch of the desired channel to LINE or MIC. • To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off the ph...