Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
..When the Mode Dial is set to button enables Quick Control of the shooting settings (p.49). ..If you press the
button, the respective setting screen will appear on the LCD monitor and you can turn the <6> or <5> dial to set the function. You can also select the AF point with <9>. If you turn off the power while the “Shooting settings display” screen is displayed, the same screen will be displayed when you turn on the power again. To cancel this, press the button to turn off the screen, then turn off the power switch. 337 3 Checking the Battery Information You can check the battery’s condition on the LCD monitor. Each Battery Pack LP-E6 has a unique serial number, and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remaining capacity and operation history. Select [Battery info.]. ..Under the [53] tab, select [Battery info.], then press <0>. • The battery info screen will appear. Battery position Battery model or household power source being used. The battery level icon (p.35) is displayed together with the remaining battery capacity shown in 1% increments. Shots taken with the current battery. The number is reset when the battery is recharged. Battery’s recharge performance level is displayed in one of three levels. (Green): Battery’s recharge performance is fine. (Green): Battery’s recharge performance is slightly degraded. (Red): Purchasing a new battery is recommended. The use of a genuine Canon Battery Pack LP-E6 is recommended. If you use any battery other than the Battery Pack LP-E6, the camera’s full performance may not be attained or malfunction may result. ..The shutter count is the number of still photos taken. (Movies are not counted.) ..The battery information will also be displayed when a LP-E6 battery pack is in the Battery Grip BG-E11. If you use size-AA/LR6 batteries, only the battery level indicator will be displayed. ..If for some reason, communication with the battery is not possible or irregular, [Use this battery?] will be displayed. If you select [OK], you can continue shooting. However, depending on the battery, the battery info screen may not be displayed or may not display battery info correctly. 3 Checking the Battery Information Registering the Battery to the Camera You can register up to six LP-E6 battery packs to the camera. To register multiple battery packs to the camera, do the procedure below for each battery pack. 1 Press the button. ..With the battery info. screen displayed, press the button. • The battery history screen will appear. • If the battery has not been registered, it will be grayed out. 2 Select [Register]. ..Select [Register], then press <0>. • The confirmation dialog will appear. 3 Select [OK]. ..Select [OK], then press <0>. • The battery pack will be registered, and the battery history screen will reappear. • The grayed-out battery number will...