Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
EF 300 mm f4L USM.. EF 400 mm f5.6L USM) The infrared mark is used when black-and-white infrared film is used. After achieving focus, shift the current distance setting at the distance index to the The lens aperture is set with the camera. 6. Setting the Aperture 32 32 ft m 3 10 15 5 7 2 3 10 15 5 7 2 32 32 ft m 5 30 15 10 32 32 ft m distance scale is aligned with the top of the letter "L." To ensure accurate focus, look through the viewfinder and check the focus. infrared mark to compensate for the focusing difference. Also use an infrared filter on the lens. ENG-7 • When compensating for the focusing difference, set the focus mode switch to MF and use the focusing ring. • The position of the infrared mark is based on a wavelength of 800 nm. The proper position of the infrared mark may differ slightly depending on the infrared film used. Taking several shots and shifting the distance setting to a slightly different position each time is recommended. • Also read the instructions that came with the infrared film. • Infrared film cannot be used with certain EOS camera models. Read the camera's instructions. The EF 300mm f/4L USM lens and EF 400mm f/5.6L USM lens come with a tripod mount. When the camera is attached with either lens and it is to be mounted on a tripod, use the lens' tripod mount instead of the camera body's tripod socket. If using the EF 200mm f/2.8L II USM lens with an extender or extension tube, use a ring-type tripod mount A (B) (sold separately) to mount it on a tripod. Using the lens' tripod mount gives better balance and stability on a tripod. By loosening the tripod mount's lock nut, the camera can be revolved for vertical or horizontal picture conposition. Be sure to tighten the tripod mount before removing the camera when using a tripod. 9. Tripod Mount (for EF 200mm f/2.8L II USM, EF 300mm f/4L USM, and EF 400mm f/5.6L USM lenses) ENG-8 EF 300mm f/4L USM, and EF 400mm f/5.6L USM lenses (pull-out type) • Pull out the hood all the way, then turn it in the direction of the arrow. The hood guards the front part of the lens against rain, snow, dust and stray light which may cause flare and ghost images. Attaching the hood On the EF 135mm f/2L USM and EF 200mm f/2.8L II USM lenses (bayonet type) • Align the hood's bayonet flange with the bayonet flange on the front of the lens, then turn the hood in the direction of the arrow. The hood can also be attached in reverse before the lens is stored in a case. 10. Hood 1 2 32 32 AF M 200mm ft m ENG-9 A filter can be attached by screwing it on the front of the lens. When a circular polarizing filter is required, use Canon's polarizing filter PL-C. The polarizing filter cannot be rotated unless the hood is detached or retracted first. 11. Filters (sold separately) 12. Extenders Separately-sold Canon Extenders EF 1.4.. II and EF 2.. II can be attached to any of the four lenses. The extenders increase the lens' focal length by 1.4.. and 2.. respectively, and the maximum aperture respectively decreases by 1 stop and 2 stops. The autofocusing speed also decreases to maintain proper AF control. • When Extender EF 1.4.. II or EF 2.. II is attached to the EF 400 mm f/5.6L USM lens, the lens switches automatically to manual focus. Also, when Extender EF 2.. II is attached to the EF 300 mm f/4L USM lens, the lens switches automatically to manual focus. N118 "This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Industry Canada." ENG-10 ........ .......................... .................................................. .......................... .................................................. ................ ................ .................... ........ .................................. ....° ....° ....° ............ .... .......... ................ ........ ............ ............................................ ....° ..° ....° .......... .... .......... ................ ........ ............ .................................. ..°...... ..°...... ..°...... .......... .... .......... ................ ........ ............ ...................................... ..°...... ..°...... ..°...... .......... .... .......... .................. ........ ............ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipmet. This e...
Otros modelos de este manual:Videocámaras - EF 400mm f/5.6L USM (695 kb)
Videocámaras - EF 135mm f/2 USM (695 kb)