Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
The wireless controller can be operated from an approximate distance of up to 5 m (16.4 ft.) from the front remote sensor (2) and approximately 1 m (3.3 ft.) from the side remote sensor (1). 1 2 When Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX is mounted Remote Sensors on the camera, it will block the front remote sensor 2. In this case, aim the Transmitter wireless controller toward the side remote sensor 1. .. Shooting Press the / button on the camera until the icon appears in the display panel, then shoot the image. ..Compose the image with the zoom buttons. ..Press the shutter button. The camera will shoot the image after the time set in [Wireless Delay] in the Rec. menu has elapsed (0 seconds, 2 seconds or 10 seconds). ..Each press of this button cycles the LCD monitor to the next display mode. The order is LCD monitor on (no display), LCD monitor on (detailed display) and LCD monitor off. .. Playback appears on the display panel. ..Displays the previous image ..Plays back the movie images ..Displays images in sets of nine (index playback). ..Displays the next image ..In magnified mode, these buttons move the magnified area around the image. ..In index playback, these buttons move the image selection. ..Each press of this button cycles the information view mode. ..The display cycles between magnifications of approximately 2.5, 5 and 10. • The operable range of the wireless controller will shorten under the following circumstances. • When the wireless controller is used at an angle to the remote sensor. • When strong light strikes the camera. • When the battery is weak. • The movie editing and printing functions are not available. • When you fix the camera to a tripod and shoot still images, aim the remote controller’s transmitter at remote sensor 1 (see the first illustration on page 176) to operate the camera from the side without touching the camera. This prevents camera shake when shooting just like using a remote release. You should set [Wireless Delay] in the Rec. menu to [0 sec.] when you use this method. Appendix 177 Attaching the Lens Hood LH-DC30 (Sold Separately) When shooting backlit scenes without a flash with the lens set to a wide angle, you should attach the lens hood to prevent light outside the scene from coming into the lens. ..When using the lens hood, you Turn to release cannot attach any other optical accessories (sold separately) to the camera. ..The LH-DC30 consists of an adapter component and a hood component. At the time of purchase, the adapter and the hood are joined together. Turn in Hood Adapter the direction of the arrow to separate the two components. 1Turn off the camera. Then press and hold the ring release button and remove the outer ring on thelens. 2Attach the adapter to the camera by aligning the part of the adapter marked (A) with the ring release button, then rotating the lensadapter until the part marked (A) aligns with the mark. Ring Ring Release Button Attach the hood by aligning the • mark on the rear of the hood with the .. mark on the adapter androtating the hood until the hood’s .. mark aligns with the adapter’s mark. • To remove the lens hood and adapter, hold down the ring release button and turn the adapter in the opposite direction shown. • If you use the built-in flash when the lens hood is attached, a portion of the flash will be blocked by the lens hood and appears dark. • If you use the viewfinder when the lens hood is attached, a portion of the view will be blocked by the lens hood. • When you are not using the lens hood, it can be stowed as shown in the illustration below. Appendix 179 Using an Externally Mounted Flash (Sold Separately) You can make your flash photography even clearer and more natural appearing with the use of a separately sold externally mounted flash. The camera’s auto exposure function will operate with a Canon Speedlite 220EX, 420EX, 550EX, 580EX, a Macro Ring Lite MR-14EX or a Macro Twin Lite MT-24EX (p. 182). (Except with the M mode or when [Flash Adjust] is set to [Manual].) Other flashes may fire manually or not fire at all. Please check the manual for your flash. * Certain functions noted in the manuals for the Canon Speedlite 220EX, 420EX, 550EX, 580EX, the Macro Ring Lite MR-14EX and Macro Twin Lite MT-24EX cannot be performed when mounted on this camera. Please read this guide before using one of these flashes on the camera. 1 1 Attach the flash to the camera’s hot shoe. 2 Turn the external flash on and turn the mode lever to (Shooting). 3 Turn the mode dial to a position other than or . Speedlite 220EX, 420EX, 550EX, 580EX, Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX • The flash will automatically adjust its output in the , , , , P, Tv and Av modes when [Flash Adjust] is set to [Auto]. The maximum flash synchro shutter speed is 1/250 second. • In M mode or when [Flash Adjust] is set to [Manual], the flash will fire with manual adjustments. The maximum flash synchro shutter speed in this case is 1/250 sec...