Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Use to take close-up shots of flowers or small objects. 1Press the DISP. button to turn the LCD monitor on. 2Press the button. • The icon appears on the LCD monitor. • Pressing the button again cancels the macro mode. 3Shoot the image. 44 Shooting – The Basics • The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway. • Shooting procedures are the same as for the Mode (p. 33). ..Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, though, part of the image may not appear in the final shot (p. 35). ..When the lens is zoomed out to the wide angle end, the recordable area is approx. 55 . 41 mm (2.2 in. . 1.6 in.)*1 , and at telephoto end, it is 92 . 69 mm (3.6 in. . 2.7 in.).*2 When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end. ..The exposure may not be optimal when the flash is used in macro mode. *1 Closest focal distance. *2 Maximum optical telephoto setting. Self-timer Mode Dial 1Press the FUNC. button and select * (Drive Mode) using or . * The current setting is displayed. 2Select or using or and press the FUNC. button. • When is selected, the shutter release will be delayed for 10 seconds, and when is selected, the shutter release will be delayed for 2 seconds, after you press the shutter button. 3Shoot the image. • When is selected, the self-timer lamp starts blinking when the shutter button is pressed all the way. The self-timer sounds and the blinking gets faster two seconds before the shutter activates. 45 Shooting – The Basics • When is selected, the self-timer lamp blinks fast from the beginning. The shutter activates in two seconds. • Shooting procedures are the same as for the mode (p. 33). You can change the self-timer sound by changing the setting in [Self-timer Sound] in the [ (My Camera)] menu (p. 72). 46 Digital Zoom Mode Dial Images can be zoomed with the combined optical and digital zoom functions as follows. • 3.8x, 4.8x, 6.0x, 7.4x, and 10x 1Press the DISP. button to turn the LCD monitor on. 2In the [ (Rec.)] menu, select (Digital Zoom). • See Selecting Menus and Settings (p. 65). 3Select [On] using or and press the MENU button. 4Press the zoom lever toward . • The lens will zoom to the maximum optical telephoto setting and stop. Release the lever Shooting – The Basics and press it toward again to further zoom the image digitally. • Press the lever toward to zoom back out. The combined magnifications of the optical zoom and digital zoom are displayed. 5Shoot the image. • Shooting procedures are the same as for the mode (p. 33). The digital zoom cannot be used when the LCD monitor is off. ..Images become coarser the more they are digitally zoomed. ..Since camera shake may become a factor when using the digital zoom, the use of a tripod is recommended. Continuous Shooting Continuous shooting is available when the Mode Dial shutter button is fully pressed. 1Press the FUNC. button. 2Select * (Drive Mode) using or . * The current setting is displayed. 3Select using or and press the FUNC. button. 4Press the shutter button halfway to lock the focus. 47 Shooting – The Basics 5Press the shutter button all the way to shoot. • Shooting will stop when the shutter button is released. • The continuous shooting speed is approx. 2.2 frames per second (Large/fine, LCD monitor off. These figures reflect Canon’s testing standard. The actual figures will vary according to the subject and shooting conditions.). ..The interval between frames may lengthen somewhat when the internal memory becomes full. ..The flash can be used, but the interval between images will lengthen to accommodate the flash recharge time. Shooting Panoramic Images (Stitch Assist) Mode Dial Use this mode when taking shots that you want to combine into a panorama. To create the panorama itself, you must stitch the images together using your computer. To create the panorama with your computer, use the PhotoStitch software that came with your camera. 48 Shooting – The Basics Framing a Subject The PhotoStitch program detects the overlapping portions of adjoining images and merges them. When shooting, try to include a distinctive item (landmark) in the overlapping portions. ..Compose each frame so that it overlaps 30 to 50 % of the adjoining image. Try to keep the vertical misalignment to within 10 % of the image height. ..Do not include moving items in the overlap. ..Do not try to stitch images that include both distant and close items. Objects may appear warped or doubled up. • Make the brightness in each image consistent. The final image will appear unnatural if the difference in brightness is too great. • For good results, pan (swivel) the camera to take successive shots. • To shoot close-ups, slide the camera over the subject, keeping it parallel as you move. Shooting 1Turn the Shooting mode dial to . • The LCD monitor wi...