Votos - 3, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
To for mat a memory card, highlight Format in the setup menu ( 213) and press the multi selector to the right. Press the multi selector up or down to highlight one of the following options and then press the button: Option Description No Exit without formatting memory card. Yes Format memory card. Message shown at right dis- played while formatting is in progress. Do not turn the camera off, remove the batteries or memory card, or unplug the AC adapter (available sepa- rately) until formatting is complete and setup menu is displayed. During Formatting Do not remove the memory card, remove the battery, or unplug the AC adapter (avail able separately) while for mat ting is in progress. Before Formatting Formatting memory cards permanently deletes all data they contain, in clud ing hidden and protected pictures and any other data that may be on the card. Be fore for mat ting, be sure to transfer to a computer any pictures you would like to keep. FAT 32 The D2Xs supports FAT 32, allowing use of memory cards with capacities of over 2 GB. FAT 16 is used when reformatting cards already formatted in FAT 16. Two -Button Format Memory cards can also be formatted with the ( and ) buttons ( 23). 214 LCD Brightness To adjust monitor brightness, highlight LCD brightness in the setup menu ( 213) and press the multi selector to the right. The menu shown at right will be displayed. Press the multi selector up to increase brightness, down to decrease. The num ber to the right of the dis play indicates the cur rent bright ness level, with +2 the brightest setting and –2 the darkest. Press the multi selector to the right to complete the operation and return to the set up menu. Mirror Lock-up This option is used to lock the mirror in the up position to allow inspection or cleaning of the low-pass filter that protects the image sensor. See “Technical Notes: Caring for the Camera” ( 253). Highlighting this option and pressing the multi selector to the right displays the menu shown above. If the multi selector is pressed to the right again, a row of dashes (“–––– –– ”) will be displayed in the top control panel. To raise the mirror, press the shutter-release button. The mirror will be locked in the up position the row of dashes will blink. The mirror will be lowered when the camera is turned off. Mirror lock up is not available when the battery level is or lower or while a multiple exposure is being recorded. 215 Menu Menu Guide—The Setup Menu Menu Guide—The Setup Menu Video Mode Before connecting your camera to a video device such as a television or VCR ( 234), choose a video mode setting that matches the video standard used in the device. Highlight Video mode in the setup menu ( 213) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. OptionDescriptionNTSC Use when connecting camera to NTSC devices. PAL Use when connecting camera to PAL devices. Note that number of pixels in output is selectively reduced, causing drop in resolution. World Time World time is used to set the camera clock to the current date and time. See “First Steps: Step 3—Basic setup” ( 17). Language Choose the language for camera menus and messages from (Chinese), Deutsch (German), English, Espanol (Spanish), Francais (French), (Korean), Italiano (Italian), (Japanese), Nederlands (Dutch), and Svenska (Swedish). See “First Steps: Step 3—Basic setup” ( 18). Video Mode The default video standard varies with the country or region of purchase. 216 Image Comment Using this option, brief texts com ment can be added to photographs as they are taken. Comments can be viewed when the pho to graphs are displayed using Capture NX (available separately) or PictureProject. The first twelve let ters of the comment are also visible on the fourth page of the pho to in for ma tion dis play ( 140). Highlight Image comment in the setup menu ( 213) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Done: Save changes and return to the setup menu. Input comment: The following dialog will be displayed. Enter a comment as described below. Keyboard area Comment area Use multi selector to high- Comment appears here. light letters, press center To move cursor, press of multi selector to select. button and use multi selector. To move the cursor in the comment area, press the button and use the multi selector. To enter a new letter at the current cursor position, use the multi selector to highlight the desired character in the keyboard area and press the center of the multi selector. To delete the character at the current cursor position, press the button. To return to the setup menu without changing the comment, press the button. Comments can be up to thirty-six characters long. Any characters after the thirty-sixth will be deleted. After editing the comment, press to return to the image comment men...