Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
To attach the core filter to power adaptor, roll the cable• ATTACHING THE FERRITE CORE To reduce electrical interference, attach the core filter to the AC power adaptor. To attach the core filter to power adaptor, roll the cable• Getting started ATTACHING THE GRIP BELT Adjust the length of grip belt so that the camcorder is stable when you press the Recording start/stop button with your thumb. ¦¦ ¦ .. If you make the grip belt too tight and use excessive force to insert your hand, the grip belt hook of the camcorder may be damaged. ¦¦¦Ferrite Core Stopper Wind the cable so that it is not slack. over core filter once. • Be careful not to damage the cable when attaching the core filter. USING THE BATTERY Purchase extra batteries to allow continuous use of your camcorder. Attaching the battery Align the battery with the indicator (.) on the battery compartment, and then push the battery in the direction of the arrow. Detaching the battery Slide the Battery release switch and pull out the battery. Gently slide Battery release switch in the direction as shown in the figure. Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger of overheating, fire, or explosion. Detach the battery from the camcorder with care to prevent it from falling. • • Getting started Getting started CHARGING THE BATTERY You can charge the battery using the AC power adaptor or the USB cable. Insert the battery into the camcorder. .page 22 To charge, use the supplied AC power adaptor or the USB cable. •• To charge the battery Charge the battery using the AC power adaptor or the USB cable. The charging (CHG) indicator lights up and charging starts. After the battery is fully charged, the charging (CHG) indicator turns green. Using the AC power adaptor Connect the AC power adaptor to the camcorder properly, and then plug the AC Power adaptor in the wall outlet. • Using the USB cable Connect the USB cable to the camcorder properly, and then connect the other end to a USB port of a PC. Please make sure that there are no foreign substances in the plug and socket when you connect the AC power supply to the camcorder. When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB. You cannot operate the camcorder using USB power only. Use the power adaptor or battery to power the camcorder. USB charging time may depend on the type of USB host on your PC. If you use the camcorder while you are charging the battery, charging may take longer. • • • • 2 Getting started Battery level display You can check the charging state and remaining battery capacity. The ...
Otros modelos de este manual:Videocámaras - HMX-H320UP (10.99 mb)
Videocámaras - HMX-H320SP (10.99 mb)
Videocámaras - HMX-H320RP (10.99 mb)
Videocámaras - HMX-H320BN (10.99 mb)