Votos - 2, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Videocámaras - DCR-HC42E (7.8 mb)
Videocámaras - DCR-HC42E (7.8 mb)
Videocámaras - DCR-HC42E (7.61 mb)
Resumen del manual
EFFECT] - [PROGRAM AE] - [EXPOSURE] - [SPOT METER] You cannot use [FADER]. • You cannot use [FADER] together with: - [SELF-TIMER] - [SUPER NSPLUS] - [COLOR SLOW S] - [D. EFFECT] - [SMTH INT. REC] (DCR-HC39E/HC42E/HC43E) You cannot use [D. EFFECT]. • You cannot use [D. EFFECT] together with: - [SUPER NSPLUS] - [COLOR SLOW S] - [FADER] • You cannot use [SLOW SHUTTR], and [OLD MOVIE] together with [PROGRAM AE] (except [AUTO]). • You cannot use [OLD MOVIE] together with: - [WIDE SELECT] (DCR-HC32E/HC33E) - [PICT. EFFECT] Dubbing/Editing/Connecting to other devices Pictures output from the camcorder do not appear on the screen of the connected device. • When attaching the camcorder to the Handycam Station, close the DC IN jack cover, and then fully insert the camcorder into the Handycam Station in the correct direction securely (p. 8). 90 Pictures from connected devices are not displayed on the LCD screen or the viewfinder. • Set [DISP OUTPUT] to [LCD PANEL] (p. 54). • You cannot input a signal to your camcorder if you press DISP/BATT INFO while [DISP OUTPUT] is set to [V-OUT/PANEL] (p. 54). Pictures from connected devices cannot be zoomed. • You cannot zoom the pictures from connected devices on your camcorder (p. 23). Time code and other information appears in the display of the connected device. • Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable (p. 54). You cannot dub correctly using the A/V connecting cable. • Set [DISP OUTPUT] to [LCD PANEL] (p. 54). • The A/V connecting cable is not connected properly. Make sure that the A/V connecting cable is connected to the proper jack, i.e. to the output jack of a device you are dubbing a picture from (for DCR-HC32E/HC33E/HC42E/HC43E), or to the input jack of another device for dubbing a picture from your camcorder. New sound added to a recorded tape is not heard. • Adjust [AUDIO MIX] from the [ST1] (original sound) side until the sound is heard appropriately (p. 63). Still pictures cannot be dubbed from a tape to a “Memory Stick Duo.” • You cannot record or a distorted picture may be recorded if the tape has been used repeatedly for recording. Movies cannot be dubbed from a tape to a “Memory Stick Duo.” • You cannot record or a distorted picture may be recorded in the following situations: - The tape has a blank section. - The tape has been used repeatedly for recording. - The input signal has been interrupted or cut. You cannot input pictures. (DCR-HC32E/HC33E/HC42E/HC43E) • You cannot input pictures while [DISP OUTPUT] is set to [V-OUT/PANEL] (p. 54). • You cannot input pictures if you press the DISP/BATT INFO button. The picture appears distorted or dark. • A/V connecting cables are connected to both your camcorder and the Handycam Station. Disconnect one of the A/V connecting cables. Continued ^ 91 Troubleshooting Troubleshooting (continued) Connecting to a computer The computer does not recognize your camcorder. [usbi rruNKi • Disconnect the cable from the computer and camcorder, then connect it again securely. • Set the (USB) ON/OFF switch on the Handycam Station to ON. • Connect the Handycam Station to the camcorder securely. • Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the computer. • Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly. An error message appears when you place the supplied CD-ROM in your computer. • Set the computer display as follows: - Windows: 800 x 600 dots or more, High Color (16 bits, 65 000 colors or more) - Macintosh: 1 024 x 768 dots or more, 32 000 colors or more You cannot view the pictures the camcorder is seeing on the computer. [usbi mjNKi • Slide the POWER switch down to turn on the CAMERA-TAPE lamp on your camcorder, and set [USB-CAMERA] to [USB STREAM] (p. 52). (Only when connecting to the Windows computer with a USB cable) • Disconnect the cable from the computer, turn on the camcorder, then connect it again. You cannot view the pictures recorded on a tape on the computer. I USBI li.LINKI • Slide the POWER switch down to turn on the PLAY/EDIT lamp on your camcorder, and set [USB-PLY/EDT] to [USB STREAM] (p. 52). (Only when connecting to the Windows computer with a USB cable) • Disconnect the cable from the computer, then connect it again. You cannot view the pictures recorded on a tape on a Macintosh computer. [USB] • When you connect your camcorder to a Macintosh computer using a USB cable, you cannot copy pictures recorded on a tape to the computer. To copy recordings from a tape, connect your camcorder to the computer with an i.LINK cable (optional) and use the standard software in the OS. You cannot view the pictures recorded on a “Memory Stick Duo” on the computer. I USBI • Insert a “Memory Stick Duo” in the correct direction, then push it all the way in. • You cannot use an i.LINK cable. Connect the camcorder and the com...
Otros modelos de este manual:Videocámaras - DCR-HC32E (4.36 mb)
Videocámaras - DCR-HC33E (4.36 mb)
Videocámaras - DCR-HC39E (4.36 mb)
Videocámaras - DCR-HC43E (4.36 mb)