Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Sony Tamaño del archivo: 3.15 mb Nombre del archivo: Idioma del manual:

Fotos y especificaciones  Sony  DCR-HC94E

4 Insert a recorded cassette into your camcorder. 5 Connect your camcorder (DCRHC36E) or the Handycam Station (DCR-HC44E/HC46E/HC94E/ HC96E) to a computer via an i.LINK cable (p. 90). • When you connect your camcorder to a computer, make sure you insert the connector in the correct way. If you insert the connector forcibly, damage may occur and cause camcorder malfunction. • For details, see “First Step Guide” on the supplied CD-ROM (p. 89). 6 Touch t [MENU] t (EDIT/PLAY) t [BURN DVD] t . “Click to DVD” starts up and the on- screen instructions appear on your computer. 7 Place a writable DVD in the disc drive of the computer. 8 Touch [EXEC] on the screen of your camcorder. BURN DVD START 0:00:00:00 CREATE DVD? EXEC CANCEL 60min The status of the operation on your computer is displayed on the LCD screen of your camcorder. [CAPTURING]: The picture recorded on the tape is being copied to the computer. [CONVERTING]: The picture is being converted to the MPEG2 format. [WRITING]: The picture is being written onto the DVD. • If you use a DVD-RW/+RW which has other data stored on it, the message [This is a recorded disc. Delete and overwrite?] appears on the LCD screen of your camcorder. When you touch [EXEC], the existing data is erased and new data is written. 9 Touch [NO] to finish creating a DVD. BURN DVD COMPLETED 0:00:00:00 Create another copy? Disctr ay opens. YES NO 60min The disc tray comes out automatically. To create another DVD with the same content, touch [YES]. The disc tray comes out. Place a new writable DVD in the disc drive. Then, repeat step 8 and 9. To cancel the operation Touch [CANCEL] on the LCD screen on your camcorder. • You cannot cancel the operation after [Finalizing DVD.] is displayed on the LCD screen of your camcorder. • Do not disconnect the i.LINK cable or set the POWER switch to another mode on your camcorder until the picture is completely copied to the computer. Continued , 91 Using a Computer Creating a DVD (Direct Access to “Click to DVD”) (Continued) • When [CONVERTING] or [WRITING] is displayed on the screen, capturing of pictures has already finished. Even if you disconnect the i.LINK cable or turn off the camcorder at this stage, DVD creation will continue on your computer. • If any of the following occurs, copying of the picture is canceled. A DVD containing the data up to the point the operation was canceled is created. Refer to the help files of “Click to DVD” for details. – The tape contains a 10-second blank portion. – The tape data contains a date before the date of later images. – Both normal and wide pictures are recorded on the same tape (Only for “Click to DVD” older than Ver.2.2). • You cannot operate [BURN DVD] in the following situations: – While a tape is running. – While recording images onto a “Memory Stick Duo.” – When “Click to DVD” is started up from the computer. – For DCR-HC96E: When [A/V t DV OUT] in the menu setting of your camcorder is set to [ON]. 93 Using a Computer Connecting an analog VCR to the computer via your camcorder (Signal convert function) (DCRHC96E) Using an i.LINK cable (3) and the A/V connecting cable (1) or the A/V connecting cable with S VIDEO (2), you can convert an analog signal output from an analog device such as a VCR to a digital signal and transfer it to a digital device, such as a computer, via your camcorder. Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p. 9). Software that can record the video signal must be installed on your computer beforehand. AA/V connecting cable (supplied) The Handycam Station and your camcorder are both equipped with A/V jacks. Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup. The A/V jack accepts analog signals. BA/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable, pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable. In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio. Ci.LINK cable (optional) Set [DISP OUTPUT] to [LCD PANEL] on the menu (p. 64) beforehand. (The default setting is [LCD PANEL].) 1 Turn on the analog video unit. 2 3 1 A/V DV A/V jack (Yellow) (White) (Red) To i.LINK jack VCR Computer DV Interface (i.LINK) To S VIDEO jack : Signal flow Continued , Connecting an analog VCR to the computer via your camcorder (Signal convert function) (Continued) 2 Slide the POWER switch of your camcorder repeatedly to turn on the PLAY/EDIT lamp. 3 On the LCD screen, touch t [MENU] t (STANDARD SET) t [A/V t DV OUT] t [ON] t t . 4 Start playback on the analog video unit. 5 Start capturing procedures on your computer. Regarding operation, refer to the operating instructions supplied...

Descargar ahora

Introduzca dos números de la imagen: