Votos - 5, Puntuación media: 3.6
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. When a face is detected, a white frame appears and the image quality around the face is optimized automatically ([FACE DETECTION], p. 80). You can specify the priority face by touching it (p. 29). In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person during movie recording (Smile Shutter, p. 30). You can capture photos from recorded movies (p. 56). The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right and left edges of images when played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to [ON] (p. 79), and record images using the outer frame displayed on the screen as a guide. . . . . Data code during recording The recording date, time and condition , and coordinates (HDR-CX500VE/CX505VE/ CX520VE) are recorded automatically on the recording media. They are not displayed during recording. However, you can check them as [DATA CODE] during playback (p. 89). Shooting photos In the default setting, photos are recorded on the internal memory (p. 68). .Open the LCD screen of your camcorder. The lens cover is opened and your camcorder is turned on. . To turn on your camcorder when the LCD screen is already open, press POWER (p. 22). .Press MODE to turn on the (Photo) lamp. The LCD screen display switches for photo recording mode, and the screen aspect ratio becomes 4:3. Table of Useful Techniques Index (button) (button) (button) 7 .Press PHOTO lightly to adjust the focus, then press it fully. . You can record photos also by touching on the LCD screen. Flashes . Lights up When disappears, the photo is recorded. . See page 113 on the recordable number of photos. . To change the image size, touch (MENU) ..[ IMAGE SIZE] (under [PHOTO SETTINGS] category) . a desired setting .. (p. 85). . You can record photos during movie recording by pressing PHOTO (Dual Rec, p. 31). . Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work during movie recording. You can change how your camcorder flashes by [FLASH MODE] (p. 86). . If you record photos using a flash with a conversion lens, the shadow may be reflected. . You cannot record photos while is displayed. If white circular spots appear on photos This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are accentuated by the camcorder’s flash, they appear as white circular spots. To reduce the white circular spots, light the room and shoot the subject without a flash. Particles (dust, Subject pollen, etc.) in the air Table of Useful Techniques Index (button) (button) (button) Touch the face you want to record as priority. The double-lined frame is displayed. Touch the face you want to record as priority. The double-lined frame is displayed. s Zooming You can magnify images up to 12 times the original size with the power zoom lever. You can magnify images also with the / on the LCD screen. Wider range of view Close view (Wide angle) (Telephoto) Move the power zoom lever slightly for a slower zoom. Move it further for a faster zoom. Be sure to keep your finger on the power zoom lever. If you move your finger off the power zoom lever, the operation sound of the power zoom lever may also be recorded. You cannot change the zoom speed with the / button on the LCD screen. The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1 cm (about 13/32 in.) for wide angle and about 80 cm (about 31 1/2 in.) for telephoto. . . Notes . . You can set [ . . Tips DIGITAL ZOOM] (p. 82) if you want to zoom to a greater level. Prioritizing the subject When [FACE DETECTION] (p. 80) is set to [ON] (the default setting), and several faces are detected, touch the face you want to record as priority. Focus/color/exposure are adjusted automatically for the selected face. Table of Useful Techniques Index (button) (button) (button) Touch the face with the double-lined frame again to cancel. Notes Notes . . Tips In the default setting, the face you touched has priority also with the Smile Shutter function. The double-lined frame around a face targeted for possible smile detection shot turns orange. . . . . If the face you touched disappears from the LCD screen, the subject selected in [PRIORITY SETTING] (p. 81) has priority. If the face you touched returns to the screen, the face has priority. Capturing smiles automatically (Smile Shutter) In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person during movie recording. An orange frame appears around a face targeted for possible smile detection shot. Notes Smiles may not be detected depending on recording conditions, subject conditions, and the setting of your camcorder. . . You can select the subject that has priority for face detection and smile detection with [PRIORITY SETTIN...
Otros modelos de este manual:Videocámaras - HDR-CX500E (3.69 mb)
Videocámaras - HDR-CX505VE (3.69 mb)
Videocámaras - HDR-CX520E (3.69 mb)
Videocámaras - HDR-CX520VE (3.69 mb)